CommandLine 2.0 Library Manual

- -

This document describes the CommandLine argument processing library. It will -show you how to use it, and what it can do. The CommandLine library uses a -declarative approach to specifying the command line options that your program -takes. By default, these options declarations implicitly hold the value parsed -for the option declared (of course this can be -changed).

- -

Although there are a lot of command line argument parsing libraries -out there in many different languages, none of them fit well with what I needed. -By looking at the features and problems of other libraries, I designed the -CommandLine library to have the following features:

- -

Speed: The CommandLine library is very quick and uses little resources. The -parsing time of the library is directly proportional to the number of arguments -parsed, not the number of options recognized. Additionally, command line -argument values are captured transparently into user defined global variables, -which can be accessed like any other variable (and with the same -performance).
Type Safe: As a user of CommandLine, you don't have to worry about -remembering the type of arguments that you want (is it an int? a string? a -bool? an enum?) and keep casting it around. Not only does this help prevent -error prone constructs, it also leads to dramatically cleaner source code.
No subclasses required: To use CommandLine, you instantiate variables that -correspond to the arguments that you would like to capture, you don't subclass a -parser. This means that you don't have to write any boilerplate -code.
Globally accessible: Libraries can specify command line arguments that are -automatically enabled in any tool that links to the library. This is possible -because the application doesn't have to keep a list of arguments to pass to -the parser. This also makes supporting dynamically -loaded options trivial.
Cleaner: CommandLine supports enum and other types directly, meaning that -there is less error and more security built into the library. You don't have to -worry about whether your integral command line argument accidentally got -assigned a value that is not valid for your enum type.
Powerful: The CommandLine library supports many different types of -arguments, from simple boolean flags to scalars arguments (strings, integers, enums, doubles), to lists of -arguments. This is possible because CommandLine is...
Extensible: It is very simple to add a new argument type to CommandLine. -Simply specify the parser that you want to use with the command line option when -you declare it. Custom parsers are no problem.
Labor Saving: The CommandLine library cuts down on the amount of grunt work -that you, the user, have to do. For example, it automatically provides a --help option that shows the available command line options for your -tool. Additionally, it does most of the basic correctness checking for -you.
Capable: The CommandLine library can handle lots of different forms of -options often found in real programs. For example, positional arguments, ls style grouping options (to allow processing 'ls --lad' naturally), ld style prefix -options (to parse '-lmalloc -L/usr/lib'), and interpreter style options.

- -

This document will hopefully let you jump in and start using CommandLine in -your utility quickly and painlessly. Additionally it should be a simple -reference manual to figure out how stuff works. If it is failing in some area -(or you want an extension to the library), nag the author, Chris Lattner.

- -

- Quick Start Guide -

- -

This section of the manual runs through a simple CommandLine'ification of a -basic compiler tool. This is intended to show you how to jump into using the -CommandLine library in your own program, and show you some of the cool things it -can do.

- -

To start out, you need to include the CommandLine header file into your -program:

- -

-  #include "llvm/Support/CommandLine.h"
-

- -

Additionally, you need to add this as the first line of your main -program:

- -

-int main(int argc, char **argv) {
-  cl::ParseCommandLineOptions(argc, argv);
-  ...
-}
-

- -

... which actually parses the arguments and fills in the variable -declarations.

- -

Now that you are ready to support command line arguments, we need to tell the -system which ones we want, and what type of arguments they are. The CommandLine -library uses a declarative syntax to model command line arguments with the -global variable declarations that capture the parsed values. This means that -for every command line option that you would like to support, there should be a -global variable declaration to capture the result. For example, in a compiler, -we would like to support the Unix-standard '-o <filename>' option -to specify where to put the output. With the CommandLine library, this is -represented like this:

- - -

-cl::opt<string> OutputFilename("o", cl::desc("Specify output filename"), cl::value_desc("filename"));
-

- -

This declares a global variable "OutputFilename" that is used to -capture the result of the "o" argument (first parameter). We specify -that this is a simple scalar option by using the "cl::opt" template (as opposed to the "cl::list template), and tell the CommandLine library -that the data type that we are parsing is a string.

- -

The second and third parameters (which are optional) are used to specify what -to output for the "-help" option. In this case, we get a line that -looks like this:

- -

-USAGE: compiler [options]
-
-OPTIONS:
-  -help             - display available options (-help-hidden for more)
-  -o <filename>     - Specify output filename
-

- -

Because we specified that the command line option should parse using the -string data type, the variable declared is automatically usable as a -real string in all contexts that a normal C++ string object may be used. For -example:

- -

-  ...
-  std::ofstream Output(OutputFilename.c_str());
-  if (Output.good()) ...
-  ...
-

- -

There are many different options that you can use to customize the command -line option handling library, but the above example shows the general interface -to these options. The options can be specified in any order, and are specified -with helper functions like cl::desc(...), so -there are no positional dependencies to remember. The available options are -discussed in detail in the Reference Guide.

- -

Continuing the example, we would like to have our compiler take an input -filename as well as an output filename, but we do not want the input filename to -be specified with a hyphen (ie, not -filename.c). To support this -style of argument, the CommandLine library allows for positional arguments to be specified for the program. -These positional arguments are filled with command line parameters that are not -in option form. We use this feature like this:

- -

-cl::opt<string> InputFilename(cl::Positional, cl::desc("<input file>"), cl::init("-"));
-

- -

This declaration indicates that the first positional argument should be -treated as the input filename. Here we use the cl::init option to specify an initial value for the -command line option, which is used if the option is not specified (if you do not -specify a cl::init modifier for an option, then -the default constructor for the data type is used to initialize the value). -Command line options default to being optional, so if we would like to require -that the user always specify an input filename, we would add the cl::Required flag, and we could eliminate the -cl::init modifier, like this:

- -

-cl::opt<string> InputFilename(cl::Positional, cl::desc("<input file>"), cl::Required);
-

- -

Again, the CommandLine library does not require the options to be specified -in any particular order, so the above declaration is equivalent to:

- -

-cl::opt<string> InputFilename(cl::Positional, cl::Required, cl::desc("<input file>"));
-

- -

By simply adding the cl::Required flag, -the CommandLine library will automatically issue an error if the argument is not -specified, which shifts all of the command line option verification code out of -your application into the library. This is just one example of how using flags -can alter the default behaviour of the library, on a per-option basis. By -adding one of the declarations above, the -help option synopsis is now -extended to:

- -

-USAGE: compiler [options] <input file>
-
-OPTIONS:
-  -help             - display available options (-help-hidden for more)
-  -o <filename>     - Specify output filename
-

- -

... indicating that an input filename is expected.

- - -

- Boolean Arguments -

- -

In addition to input and output filenames, we would like the compiler example -to support three boolean flags: "-f" to force writing binary output to -a terminal, "--quiet" to enable quiet mode, and "-q" for -backwards compatibility with some of our users. We can support these by -declaring options of boolean type like this:

- -

-cl::opt<bool> Force ("f", cl::desc("Enable binary output on terminals"));
-cl::opt<bool> Quiet ("quiet", cl::desc("Don't print informational messages"));
-cl::opt<bool> Quiet2("q", cl::desc("Don't print informational messages"), cl::Hidden);
-

- -

This does what you would expect: it declares three boolean variables -("Force", "Quiet", and "Quiet2") to recognize these -options. Note that the "-q" option is specified with the "cl::Hidden" flag. This modifier prevents it -from being shown by the standard "-help" output (note that it is still -shown in the "-help-hidden" output).

- -

The CommandLine library uses a different parser -for different data types. For example, in the string case, the argument passed -to the option is copied literally into the content of the string variable... we -obviously cannot do that in the boolean case, however, so we must use a smarter -parser. In the case of the boolean parser, it allows no options (in which case -it assigns the value of true to the variable), or it allows the values -"true" or "false" to be specified, allowing any of the -following inputs:

- -

- compiler -f          # No value, 'Force' == true
- compiler -f=true     # Value specified, 'Force' == true
- compiler -f=TRUE     # Value specified, 'Force' == true
- compiler -f=FALSE    # Value specified, 'Force' == false
-

- -

... you get the idea. The bool parser just turns -the string values into boolean values, and rejects things like 'compiler --f=foo'. Similarly, the float, double, and int parsers work -like you would expect, using the 'strtol' and 'strtod' C -library calls to parse the string value into the specified data type.

- -

With the declarations above, "compiler -help" emits this:

- -

-USAGE: compiler [options] <input file>
-
-OPTIONS:
-  -f     - Enable binary output on terminals
-  -o     - Override output filename
-  -quiet - Don't print informational messages
-  -help  - display available options (-help-hidden for more)
-

- -

and "compiler -help-hidden" prints this:

- -

-USAGE: compiler [options] <input file>
-
-OPTIONS:
-  -f     - Enable binary output on terminals
-  -o     - Override output filename
-  -q     - Don't print informational messages
-  -quiet - Don't print informational messages
-  -help  - display available options (-help-hidden for more)
-

- -

This brief example has shown you how to use the 'cl::opt' class to parse simple scalar command line -arguments. In addition to simple scalar arguments, the CommandLine library also -provides primitives to support CommandLine option aliases, -and lists of options.

- -

- - -

- Argument Aliases -

- -

So far, the example works well, except for the fact that we need to check the -quiet condition like this now:

- -

-...
-  if (!Quiet && !Quiet2) printInformationalMessage(...);
-...
-

- -

... which is a real pain! Instead of defining two values for the same -condition, we can use the "cl::alias" class to make the "-q" -option an alias for the "-quiet" option, instead of providing -a value itself:

- -

-cl::opt<bool> Force ("f", cl::desc("Overwrite output files"));
-cl::opt<bool> Quiet ("quiet", cl::desc("Don't print informational messages"));
-cl::alias     QuietA("q", cl::desc("Alias for -quiet"), cl::aliasopt(Quiet));
-

- -

The third line (which is the only one we modified from above) defines a -"-q" alias that updates the "Quiet" variable (as specified by -the cl::aliasopt modifier) whenever it is -specified. Because aliases do not hold state, the only thing the program has to -query is the Quiet variable now. Another nice feature of aliases is -that they automatically hide themselves from the -help output -(although, again, they are still visible in the -help-hidden -output).

- -

Now the application code can simply use:

- -

-...
-  if (!Quiet) printInformationalMessage(...);
-...
-

- -

... which is much nicer! The "cl::alias" -can be used to specify an alternative name for any variable type, and has many -uses.

- -

- - -

- Selecting an alternative from a set of - possibilities -

- -

So far we have seen how the CommandLine library handles builtin types like -std::string, bool and int, but how does it handle -things it doesn't know about, like enums or 'int*'s?

- -

The answer is that it uses a table-driven generic parser (unless you specify -your own parser, as described in the Extension -Guide). This parser maps literal strings to whatever type is required, and -requires you to tell it what this mapping should be.

- -

Let's say that we would like to add four optimization levels to our -optimizer, using the standard flags "-g", "-O0", -"-O1", and "-O2". We could easily implement this with boolean -options like above, but there are several problems with this strategy:

- -

A user could specify more than one of the options at a time, for example, -"compiler -O3 -O2". The CommandLine library would not be able to -catch this erroneous input for us.
We would have to test 4 different variables to see which ones are set.
This doesn't map to the numeric levels that we want... so we cannot easily -see if some level >= "-O1" is enabled.

- -

To cope with these problems, we can use an enum value, and have the -CommandLine library fill it in with the appropriate level directly, which is -used like this:

- -

-enum OptLevel {
-  g, O1, O2, O3
-};
-
-cl::opt<OptLevel> OptimizationLevel(cl::desc("Choose optimization level:"),
-  cl::values(
-    clEnumVal(g , "No optimizations, enable debugging"),
-    clEnumVal(O1, "Enable trivial optimizations"),
-    clEnumVal(O2, "Enable default optimizations"),
-    clEnumVal(O3, "Enable expensive optimizations"),
-   clEnumValEnd));
-
-...
-  if (OptimizationLevel >= O2) doPartialRedundancyElimination(...);
-...
-

- -

This declaration defines a variable "OptimizationLevel" of the -"OptLevel" enum type. This variable can be assigned any of the values -that are listed in the declaration (Note that the declaration list must be -terminated with the "clEnumValEnd" argument!). The CommandLine -library enforces -that the user can only specify one of the options, and it ensure that only valid -enum values can be specified. The "clEnumVal" macros ensure that the -command line arguments matched the enum values. With this option added, our -help output now is:

- -

-USAGE: compiler [options] <input file>
-
-OPTIONS:
-  Choose optimization level:
-    -g          - No optimizations, enable debugging
-    -O1         - Enable trivial optimizations
-    -O2         - Enable default optimizations
-    -O3         - Enable expensive optimizations
-  -f            - Enable binary output on terminals
-  -help         - display available options (-help-hidden for more)
-  -o <filename> - Specify output filename
-  -quiet        - Don't print informational messages
-

- -

In this case, it is sort of awkward that flag names correspond directly to -enum names, because we probably don't want a enum definition named "g" -in our program. Because of this, we can alternatively write this example like -this:

- -

-enum OptLevel {
-  Debug, O1, O2, O3
-};
-
-cl::opt<OptLevel> OptimizationLevel(cl::desc("Choose optimization level:"),
-  cl::values(
-   clEnumValN(Debug, "g", "No optimizations, enable debugging"),
-    clEnumVal(O1        , "Enable trivial optimizations"),
-    clEnumVal(O2        , "Enable default optimizations"),
-    clEnumVal(O3        , "Enable expensive optimizations"),
-   clEnumValEnd));
-
-...
-  if (OptimizationLevel == Debug) outputDebugInfo(...);
-...
-

- -

By using the "clEnumValN" macro instead of "clEnumVal", we -can directly specify the name that the flag should get. In general a direct -mapping is nice, but sometimes you can't or don't want to preserve the mapping, -which is when you would use it.

- -

- - -

- Named Alternatives -

- -

Another useful argument form is a named alternative style. We shall use this -style in our compiler to specify different debug levels that can be used. -Instead of each debug level being its own switch, we want to support the -following options, of which only one can be specified at a time: -"--debug-level=none", "--debug-level=quick", -"--debug-level=detailed". To do this, we use the exact same format as -our optimization level flags, but we also specify an option name. For this -case, the code looks like this:

- -

-enum DebugLev {
-  nodebuginfo, quick, detailed
-};
-
-// Enable Debug Options to be specified on the command line
-cl::opt<DebugLev> DebugLevel("debug_level", cl::desc("Set the debugging level:"),
-  cl::values(
-    clEnumValN(nodebuginfo, "none", "disable debug information"),
-     clEnumVal(quick,               "enable quick debug information"),
-     clEnumVal(detailed,            "enable detailed debug information"),
-    clEnumValEnd));
-

- -

This definition defines an enumerated command line variable of type "enum -DebugLev", which works exactly the same way as before. The difference here -is just the interface exposed to the user of your program and the help output by -the "-help" option:

- -

-USAGE: compiler [options] <input file>
-
-OPTIONS:
-  Choose optimization level:
-    -g          - No optimizations, enable debugging
-    -O1         - Enable trivial optimizations
-    -O2         - Enable default optimizations
-    -O3         - Enable expensive optimizations
-  -debug_level  - Set the debugging level:
-    =none       - disable debug information
-    =quick      - enable quick debug information
-    =detailed   - enable detailed debug information
-  -f            - Enable binary output on terminals
-  -help         - display available options (-help-hidden for more)
-  -o <filename> - Specify output filename
-  -quiet        - Don't print informational messages
-

- -

Again, the only structural difference between the debug level declaration and -the optimization level declaration is that the debug level declaration includes -an option name ("debug_level"), which automatically changes how the -library processes the argument. The CommandLine library supports both forms so -that you can choose the form most appropriate for your application.

- -

- - -

- Parsing a list of options -

- -

Now that we have the standard run-of-the-mill argument types out of the way, -lets get a little wild and crazy. Lets say that we want our optimizer to accept -a list of optimizations to perform, allowing duplicates. For example, we -might want to run: "compiler -dce -constprop -inline -dce -strip". In -this case, the order of the arguments and the number of appearances is very -important. This is what the "cl::list" -template is for. First, start by defining an enum of the optimizations that you -would like to perform:

- -

-enum Opts {
-  // 'inline' is a C++ keyword, so name it 'inlining'
-  dce, constprop, inlining, strip
-};
-

- -

Then define your "cl::list" variable:

- -

-cl::list<Opts> OptimizationList(cl::desc("Available Optimizations:"),
-  cl::values(
-    clEnumVal(dce               , "Dead Code Elimination"),
-    clEnumVal(constprop         , "Constant Propagation"),
-   clEnumValN(inlining, "inline", "Procedure Integration"),
-    clEnumVal(strip             , "Strip Symbols"),
-  clEnumValEnd));
-

- -

This defines a variable that is conceptually of the type -"std::vector<enum Opts>". Thus, you can access it with standard -vector methods:

- -

-  for (unsigned i = 0; i != OptimizationList.size(); ++i)
-    switch (OptimizationList[i])
-       ...
-

- -

... to iterate through the list of options specified.

- -

Note that the "cl::list" template is -completely general and may be used with any data types or other arguments that -you can use with the "cl::opt" template. One -especially useful way to use a list is to capture all of the positional -arguments together if there may be more than one specified. In the case of a -linker, for example, the linker takes several '.o' files, and needs to -capture them into a list. This is naturally specified as:

- -

-...
-cl::list<std::string> InputFilenames(cl::Positional, cl::desc("<Input files>"), cl::OneOrMore);
-...
-

- -

This variable works just like a "vector<string>" object. As -such, accessing the list is simple, just like above. In this example, we used -the cl::OneOrMore modifier to inform the -CommandLine library that it is an error if the user does not specify any -.o files on our command line. Again, this just reduces the amount of -checking we have to do.

- -

- - -

- Collecting options as a set of flags -

- -

Instead of collecting sets of options in a list, it is also possible to -gather information for enum values in a bit vector. The representation used by -the cl::bits class is an unsigned -integer. An enum value is represented by a 0/1 in the enum's ordinal value bit -position. 1 indicating that the enum was specified, 0 otherwise. As each -specified value is parsed, the resulting enum's bit is set in the option's bit -vector:

- -

-  bits |= 1 << (unsigned)enum;
-

- -

Options that are specified multiple times are redundant. Any instances after -the first are discarded.

- -

Reworking the above list example, we could replace -cl::list with cl::bits:

- -

-cl::bits<Opts> OptimizationBits(cl::desc("Available Optimizations:"),
-  cl::values(
-    clEnumVal(dce               , "Dead Code Elimination"),
-    clEnumVal(constprop         , "Constant Propagation"),
-   clEnumValN(inlining, "inline", "Procedure Integration"),
-    clEnumVal(strip             , "Strip Symbols"),
-  clEnumValEnd));
-

- -

To test to see if constprop was specified, we can use the -cl:bits::isSet function:

- -

-  if (OptimizationBits.isSet(constprop)) {
-    ...
-  }
-

- -

It's also possible to get the raw bit vector using the -cl::bits::getBits function:

- -

-  unsigned bits = OptimizationBits.getBits();
-

- -

Finally, if external storage is used, then the location specified must be of -type unsigned. In all other ways a cl::bits option is equivalent to a cl::list option.

- -

- - - -

- Adding freeform text to help output -

- -

As our program grows and becomes more mature, we may decide to put summary -information about what it does into the help output. The help output is styled -to look similar to a Unix man page, providing concise information about -a program. Unix man pages, however often have a description about what -the program does. To add this to your CommandLine program, simply pass a third -argument to the cl::ParseCommandLineOptions -call in main. This additional argument is then printed as the overview -information for your program, allowing you to include any additional information -that you want. For example:

- -

-int main(int argc, char **argv) {
-  cl::ParseCommandLineOptions(argc, argv, " CommandLine compiler example\n\n"
-                              "  This program blah blah blah...\n");
-  ...
-}
-

- -

would yield the help output:

- -

-OVERVIEW: CommandLine compiler example
-
-  This program blah blah blah...
-
-USAGE: compiler [options] <input file>
-
-OPTIONS:
-  ...
-  -help             - display available options (-help-hidden for more)
-  -o <filename>     - Specify output filename
-

- -

- Reference Guide -

- -

Now that you know the basics of how to use the CommandLine library, this -section will give you the detailed information you need to tune how command line -options work, as well as information on more "advanced" command line option -processing capabilities.

- - -

- Positional Arguments -

- -

Positional arguments are those arguments that are not named, and are not -specified with a hyphen. Positional arguments should be used when an option is -specified by its position alone. For example, the standard Unix grep -tool takes a regular expression argument, and an optional filename to search -through (which defaults to standard input if a filename is not specified). -Using the CommandLine library, this would be specified as:

- -

-cl::opt<string> Regex   (cl::Positional, cl::desc("<regular expression>"), cl::Required);
-cl::opt<string> Filename(cl::Positional, cl::desc("<input file>"), cl::init("-"));
-

- -

Given these two option declarations, the -help output for our grep -replacement would look like this:

- -

-USAGE: spiffygrep [options] <regular expression> <input file>
-
-OPTIONS:
-  -help - display available options (-help-hidden for more)
-

- -

... and the resultant program could be used just like the standard -grep tool.

- -

Positional arguments are sorted by their order of construction. This means -that command line options will be ordered according to how they are listed in a -.cpp file, but will not have an ordering defined if the positional arguments -are defined in multiple .cpp files. The fix for this problem is simply to -define all of your positional arguments in one .cpp file.

- - -

- Specifying positional options with hyphens -

- -

Sometimes you may want to specify a value to your positional argument that -starts with a hyphen (for example, searching for '-foo' in a file). At -first, you will have trouble doing this, because it will try to find an argument -named '-foo', and will fail (and single quotes will not save you). -Note that the system grep has the same problem:

- -

-  $ spiffygrep '-foo' test.txt
-  Unknown command line argument '-foo'.  Try: spiffygrep -help'
-
-  $ grep '-foo' test.txt
-  grep: illegal option -- f
-  grep: illegal option -- o
-  grep: illegal option -- o
-  Usage: grep -hblcnsviw pattern file . . .
-

- -

The solution for this problem is the same for both your tool and the system -version: use the '--' marker. When the user specifies '--' on -the command line, it is telling the program that all options after the -'--' should be treated as positional arguments, not options. Thus, we -can use it like this:

- -

-  $ spiffygrep -- -foo test.txt
-    ...output...
-

- -

- - -

- Determining absolute position with getPosition() -

Sometimes an option can affect or modify the meaning of another option. For - example, consider gcc's -x LANG option. This tells - gcc to ignore the suffix of subsequent positional arguments and force - the file to be interpreted as if it contained source code in language - LANG. In order to handle this properly, you need to know the - absolute position of each argument, especially those in lists, so their - interaction(s) can be applied correctly. This is also useful for options like - -llibname which is actually a positional argument that starts with - a dash.

So, generally, the problem is that you have two cl::list variables - that interact in some way. To ensure the correct interaction, you can use the - cl::list::getPosition(optnum) method. This method returns the - absolute position (as found on the command line) of the optnum - item in the cl::list.

The idiom for usage is like this:

- -

-  static cl::list<std::string> Files(cl::Positional, cl::OneOrMore);
-  static cl::list<std::string> Libraries("l", cl::ZeroOrMore);
-
-  int main(int argc, char**argv) {
-    // ...
-    std::vector<std::string>::iterator fileIt = Files.begin();
-    std::vector<std::string>::iterator libIt  = Libraries.begin();
-    unsigned libPos = 0, filePos = 0;
-    while ( 1 ) {
-      if ( libIt != Libraries.end() )
-        libPos = Libraries.getPosition( libIt - Libraries.begin() );
-      else
-        libPos = 0;
-      if ( fileIt != Files.end() )
-        filePos = Files.getPosition( fileIt - Files.begin() );
-      else
-        filePos = 0;
-
-      if ( filePos != 0 && (libPos == 0 || filePos < libPos) ) {
-        // Source File Is next
-        ++fileIt;
-      }
-      else if ( libPos != 0 && (filePos == 0 || libPos < filePos) ) {
-        // Library is next
-        ++libIt;
-      }
-      else
-        break; // we're done with the list
-    }
-  }

- -

Note that, for compatibility reasons, the cl::opt also supports an - unsigned getPosition() option that will provide the absolute position - of that option. You can apply the same approach as above with a - cl::opt and a cl::list option as you can with two lists.

- - -

- The `cl::ConsumeAfter` modifier -

- -

The cl::ConsumeAfter formatting option is -used to construct programs that use "interpreter style" option processing. With -this style of option processing, all arguments specified after the last -positional argument are treated as special interpreter arguments that are not -interpreted by the command line argument.

- -

As a concrete example, lets say we are developing a replacement for the -standard Unix Bourne shell (/bin/sh). To run /bin/sh, first -you specify options to the shell itself (like -x which turns on trace -output), then you specify the name of the script to run, then you specify -arguments to the script. These arguments to the script are parsed by the Bourne -shell command line option processor, but are not interpreted as options to the -shell itself. Using the CommandLine library, we would specify this as:

- -

-cl::opt<string> Script(cl::Positional, cl::desc("<input script>"), cl::init("-"));
-cl::list<string>  Argv(cl::ConsumeAfter, cl::desc("<program arguments>..."));
-cl::opt<bool>    Trace("x", cl::desc("Enable trace output"));
-

- -

which automatically provides the help output:

- -

-USAGE: spiffysh [options] <input script> <program arguments>...
-
-OPTIONS:
-  -help - display available options (-help-hidden for more)
-  -x    - Enable trace output
-

- -

At runtime, if we run our new shell replacement as `spiffysh -x test.sh --a -x -y bar', the Trace variable will be set to true, the -Script variable will be set to "test.sh", and the -Argv list will contain ["-a", "-x", "-y", "bar"], because they -were specified after the last positional argument (which is the script -name).

- -

There are several limitations to when cl::ConsumeAfter options can -be specified. For example, only one cl::ConsumeAfter can be specified -per program, there must be at least one positional -argument specified, there must not be any cl::list -positional arguments, and the cl::ConsumeAfter option should be a cl::list option.

- -

- - -

- Internal vs External Storage -

- -

By default, all command line options automatically hold the value that they -parse from the command line. This is very convenient in the common case, -especially when combined with the ability to define command line options in the -files that use them. This is called the internal storage model.

- -

Sometimes, however, it is nice to separate the command line option processing -code from the storage of the value parsed. For example, lets say that we have a -'-debug' option that we would like to use to enable debug information -across the entire body of our program. In this case, the boolean value -controlling the debug code should be globally accessible (in a header file, for -example) yet the command line option processing code should not be exposed to -all of these clients (requiring lots of .cpp files to #include -CommandLine.h).

- -

To do this, set up your .h file with your option, like this for example:

- -

-// DebugFlag.h - Get access to the '-debug' command line option
-//
-
-// DebugFlag - This boolean is set to true if the '-debug' command line option
-// is specified.  This should probably not be referenced directly, instead, use
-// the DEBUG macro below.
-//
-extern bool DebugFlag;
-
-// DEBUG macro - This macro should be used by code to emit debug information.
-// In the '-debug' option is specified on the command line, and if this is a
-// debug build, then the code specified as the option to the macro will be
-// executed.  Otherwise it will not be.
-#ifdef NDEBUG
-#define DEBUG(X)
-#else
-#define DEBUG(X) do { if (DebugFlag) { X; } } while (0)
-#endif
-

- -

This allows clients to blissfully use the DEBUG() macro, or the -DebugFlag explicitly if they want to. Now we just need to be able to -set the DebugFlag boolean when the option is set. To do this, we pass -an additional argument to our command line argument processor, and we specify -where to fill in with the cl::location -attribute:

- -

-bool DebugFlag;                  // the actual value
-static cl::opt<bool, true>       // The parser
-Debug("debug", cl::desc("Enable debug output"), cl::Hidden, cl::location(DebugFlag));
-

- -

In the above example, we specify "true" as the second argument to -the cl::opt template, indicating that the -template should not maintain a copy of the value itself. In addition to this, -we specify the cl::location attribute, so -that DebugFlag is automatically set.

- -

- - -

- Option Attributes -

- -

This section describes the basic attributes that you can specify on -options.

- -

The option name attribute (which is required for all options, except positional options) specifies what the option name is. -This option is specified in simple double quotes: - -
```
-cl::opt<bool> Quiet("quiet");
-
```
- -
The cl::desc attribute specifies a -description for the option to be shown in the -help output for the -program.
The cl::value_desc attribute -specifies a string that can be used to fine tune the -help output for -a command line option. Look here for an -example.
The cl::init attribute specifies an -initial value for a scalar option. If this attribute is -not specified then the command line option value defaults to the value created -by the default constructor for the type. Warning: If you specify both -cl::init and cl::location for an option, -you must specify cl::location first, so that when the -command-line parser sees cl::init, it knows where to put the -initial value. (You will get an error at runtime if you don't put them in -the right order.)
The cl::location attribute where -to store the value for a parsed command line option if using external storage. -See the section on Internal vs External Storage for more -information.
The cl::aliasopt attribute -specifies which option a cl::alias option is -an alias for.
The cl::values attribute specifies -the string-to-value mapping to be used by the generic parser. It takes a -clEnumValEnd terminated list of (option, value, description) triplets -that -specify the option name, the value mapped to, and the description shown in the --help for the tool. Because the generic parser is used most -frequently with enum values, two macros are often useful: - -
1. The clEnumVal macro is used as a -nice simple way to specify a triplet for an enum. This macro automatically -makes the option name be the same as the enum name. The first option to the -macro is the enum, the second is the description for the command line -option.
2. The clEnumValN macro is used to -specify macro options where the option name doesn't equal the enum name. For -this macro, the first argument is the enum value, the second is the flag name, -and the second is the description.
- -You will get a compile time error if you try to use cl::values with a parser -that does not support it.
The cl::multi_val -attribute specifies that this option takes has multiple values -(example: -sectalign segname sectname sectvalue). This -attribute takes one unsigned argument - the number of values for the -option. This attribute is valid only on cl::list options (and -will fail with compile error if you try to use it with other option -types). It is allowed to use all of the usual modifiers on -multi-valued options (besides cl::ValueDisallowed, -obviously).

- -

- - -

- Option Modifiers -

- -

Option modifiers are the flags and expressions that you pass into the -constructors for cl::opt and cl::list. These modifiers give you the ability to -tweak how options are parsed and how -help output is generated to fit -your application well.

- -

These options fall into five main categories:

- -

Hiding an option from -help output
Controlling the number of occurrences - required and allowed
Controlling whether or not a value must be - specified
Controlling other formatting options
Miscellaneous option modifiers

- -

It is not possible to specify two options from the same category (you'll get -a runtime error) to a single option, except for options in the miscellaneous -category. The CommandLine library specifies defaults for all of these settings -that are the most useful in practice and the most common, which mean that you -usually shouldn't have to worry about these.

- - -

- Hiding an option from `-help` output -

- -

The cl::NotHidden, cl::Hidden, and -cl::ReallyHidden modifiers are used to control whether or not an option -appears in the -help and -help-hidden output for the -compiled program:

- -

The cl::NotHidden modifier -(which is the default for cl::opt and cl::list options) indicates the option is to appear -in both help listings.
The cl::Hidden modifier (which is the -default for cl::alias options) indicates that -the option should not appear in the -help output, but should appear in -the -help-hidden output.
The cl::ReallyHidden modifier -indicates that the option should not appear in any help output.

- -

- - -

- Controlling the number of occurrences required and - allowed -

- -

This group of options is used to control how many time an option is allowed -(or required) to be specified on the command line of your program. Specifying a -value for this setting allows the CommandLine library to do error checking for -you.

- -

The allowed values for this option group are:

- -

The cl::Optional modifier (which -is the default for the cl::opt and cl::alias classes) indicates that your program will -allow either zero or one occurrence of the option to be specified.
The cl::ZeroOrMore modifier -(which is the default for the cl::list class) -indicates that your program will allow the option to be specified zero or more -times.
The cl::Required modifier -indicates that the specified option must be specified exactly one time.
The cl::OneOrMore modifier -indicates that the option must be specified at least one time.
The cl::ConsumeAfter modifier is described in the Positional arguments section.

- -

If an option is not specified, then the value of the option is equal to the -value specified by the cl::init attribute. If -the cl::init attribute is not specified, the -option value is initialized with the default constructor for the data type.

- -

If an option is specified multiple times for an option of the cl::opt class, only the last value will be -retained.

- -

- - -

- Controlling whether or not a value must be specified -

- -

This group of options is used to control whether or not the option allows a -value to be present. In the case of the CommandLine library, a value is either -specified with an equal sign (e.g. '-index-depth=17') or as a trailing -string (e.g. '-o a.out').

- -

The allowed values for this option group are:

- -

The cl::ValueOptional modifier -(which is the default for bool typed options) specifies that it is -acceptable to have a value, or not. A boolean argument can be enabled just by -appearing on the command line, or it can have an explicit '-foo=true'. -If an option is specified with this mode, it is illegal for the value to be -provided without the equal sign. Therefore '-foo true' is illegal. To -get this behavior, you must use the cl::ValueRequired modifier.
The cl::ValueRequired modifier -(which is the default for all other types except for unnamed alternatives using the generic parser) -specifies that a value must be provided. This mode informs the command line -library that if an option is not provides with an equal sign, that the next -argument provided must be the value. This allows things like '-o -a.out' to work.
The cl::ValueDisallowed -modifier (which is the default for unnamed -alternatives using the generic parser) indicates that it is a runtime error -for the user to specify a value. This can be provided to disallow users from -providing options to boolean options (like '-foo=true').

- -

In general, the default values for this option group work just like you would -want them to. As mentioned above, you can specify the cl::ValueDisallowed modifier to a boolean -argument to restrict your command line parser. These options are mostly useful -when extending the library.

- -

- - -

- Controlling other formatting options -

- -

The formatting option group is used to specify that the command line option -has special abilities and is otherwise different from other command line -arguments. As usual, you can only specify one of these arguments at most.

- -

The cl::NormalFormatting -modifier (which is the default all options) specifies that this option is -"normal".
The cl::Positional modifier -specifies that this is a positional argument that does not have a command line -option associated with it. See the Positional -Arguments section for more information.
The cl::ConsumeAfter modifier -specifies that this option is used to capture "interpreter style" arguments. See this section for more information.
The cl::Prefix modifier specifies -that this option prefixes its value. With 'Prefix' options, the equal sign does -not separate the value from the option name specified. Instead, the value is -everything after the prefix, including any equal sign if present. This is useful -for processing odd arguments like -lmalloc and -L/usr/lib in a -linker tool or -DNAME=value in a compiler tool. Here, the -'l', 'D' and 'L' options are normal string (or list) -options, that have the cl::Prefix -modifier added to allow the CommandLine library to recognize them. Note that -cl::Prefix options must not have the -cl::ValueDisallowed modifier -specified.
The cl::Grouping modifier is used -to implement Unix-style tools (like ls) that have lots of single letter -arguments, but only require a single dash. For example, the 'ls -labF' -command actually enables four different options, all of which are single -letters. Note that cl::Grouping -options cannot have values.

- -

The CommandLine library does not restrict how you use the cl::Prefix or cl::Grouping modifiers, but it is possible to -specify ambiguous argument settings. Thus, it is possible to have multiple -letter options that are prefix or grouping options, and they will still work as -designed.

- -

To do this, the CommandLine library uses a greedy algorithm to parse the -input option into (potentially multiple) prefix and grouping options. The -strategy basically looks like this:

- -

parse(string OrigInput) { - -

string input = OrigInput; -
if (isOption(input)) return getOption(input).parse(); // Normal option -
while (!isOption(input) && !input.empty()) input.pop_back(); // Remove the last letter -
if (input.empty()) return error(); // No matching option -
if (getOption(input).isPrefix()) - return getOption(input).parse(input); -
while (!input.empty()) { // Must be grouping options - getOption(input).parse(); - OrigInput.erase(OrigInput.begin(), OrigInput.begin()+input.length()); - input = OrigInput; - while (!isOption(input) && !input.empty()) input.pop_back(); -} -
if (!OrigInput.empty()) error();

- -

}

- -

- - -

- Miscellaneous option modifiers -

- -

The miscellaneous option modifiers are the only flags where you can specify -more than one flag from the set: they are not mutually exclusive. These flags -specify boolean properties that modify the option.

- -

The cl::CommaSeparated modifier -indicates that any commas specified for an option's value should be used to -split the value up into multiple values for the option. For example, these two -options are equivalent when cl::CommaSeparated is specified: -"-foo=a -foo=b -foo=c" and "-foo=a,b,c". This option only -makes sense to be used in a case where the option is allowed to accept one or -more values (i.e. it is a cl::list option).
The -cl::PositionalEatsArgs modifier (which only applies to -positional arguments, and only makes sense for lists) indicates that positional -argument should consume any strings after it (including strings that start with -a "-") up until another recognized positional argument. For example, if you -have two "eating" positional arguments, "pos1" and "pos2", the -string "-pos1 -foo -bar baz -pos2 -bork" would cause the "-foo -bar --baz" strings to be applied to the "-pos1" option and the -"-bork" string to be applied to the "-pos2" option.
The cl::Sink modifier is -used to handle unknown options. If there is at least one option with -cl::Sink modifier specified, the parser passes -unrecognized option strings to it as values instead of signaling an -error. As with cl::CommaSeparated, this modifier -only makes sense with a cl::list option.

- -

So far, these are the only three miscellaneous option modifiers.

- -

- - -

- Response files -

- -

Some systems, such as certain variants of Microsoft Windows and -some older Unices have a relatively low limit on command-line -length. It is therefore customary to use the so-called 'response -files' to circumvent this restriction. These files are mentioned on -the command-line (using the "@file") syntax. The program reads these -files and inserts the contents into argv, thereby working around the -command-line length limits. Response files are enabled by an optional -fourth argument to -cl::ParseEnvironmentOptions -and -cl::ParseCommandLineOptions. -

- -

- - -

- Top-Level Classes and Functions -

- -

Despite all of the built-in flexibility, the CommandLine option library -really only consists of one function (cl::ParseCommandLineOptions) -and three main classes: cl::opt, cl::list, and cl::alias. This section describes these three -classes in detail.

- - -

- The `cl::ParseCommandLineOptions` - function -

- -

The cl::ParseCommandLineOptions function is designed to be called -directly from main, and is used to fill in the values of all of the -command line option variables once argc and argv are -available.

- -

The cl::ParseCommandLineOptions function requires two parameters -(argc and argv), but may also take an optional third parameter -which holds additional extra text to emit when the --help option is invoked, and a fourth boolean parameter that enables -response files.

- -

- - -

- The `cl::ParseEnvironmentOptions` - function -

- -

The cl::ParseEnvironmentOptions function has mostly the same effects -as cl::ParseCommandLineOptions, -except that it is designed to take values for options from an environment -variable, for those cases in which reading the command line is not convenient or -desired. It fills in the values of all the command line option variables just -like cl::ParseCommandLineOptions -does.

- -

It takes four parameters: the name of the program (since argv may -not be available, it can't just look in argv[0]), the name of the -environment variable to examine, the optional -additional extra text to emit when the --help option is invoked, and the boolean -switch that controls whether response files -should be read.

- -

cl::ParseEnvironmentOptions will break the environment -variable's value up into words and then process them using -cl::ParseCommandLineOptions. -Note: Currently cl::ParseEnvironmentOptions does not support -quoting, so an environment variable containing -option "foo bar" will -be parsed as three words, -option, "foo, and bar", -which is different from what you would get from the shell with the same -input.

- -

- - -

- The `cl::SetVersionPrinter` - function -

- -

The cl::SetVersionPrinter function is designed to be called -directly from main and before -cl::ParseCommandLineOptions. Its use is optional. It simply arranges -for a function to be called in response to the --version option instead -of having the CommandLine library print out the usual version string -for LLVM. This is useful for programs that are not part of LLVM but wish to use -the CommandLine facilities. Such programs should just define a small -function that takes no arguments and returns void and that prints out -whatever version information is appropriate for the program. Pass the address -of that function to cl::SetVersionPrinter to arrange for it to be -called when the --version option is given by the user.

- -

- The `cl::opt` class -

- -

The cl::opt class is the class used to represent scalar command line -options, and is the one used most of the time. It is a templated class which -can take up to three arguments (all except for the first have default values -though):

- -

-namespace cl {
-  template <class DataType, bool ExternalStorage = false,
-            class ParserClass = parser<DataType> >
-  class opt;
-}
-

- -

The first template argument specifies what underlying data type the command -line argument is, and is used to select a default parser implementation. The -second template argument is used to specify whether the option should contain -the storage for the option (the default) or whether external storage should be -used to contain the value parsed for the option (see Internal -vs External Storage for more information).

- -

The third template argument specifies which parser to use. The default value -selects an instantiation of the parser class based on the underlying -data type of the option. In general, this default works well for most -applications, so this option is only used when using a custom parser.

- -

- - -

- The `cl::list` class -

- -

The cl::list class is the class used to represent a list of command -line options. It too is a templated class which can take up to three -arguments:

- -

-namespace cl {
-  template <class DataType, class Storage = bool,
-            class ParserClass = parser<DataType> >
-  class list;
-}
-

- -

This class works the exact same as the cl::opt class, except that the second argument is -the type of the external storage, not a boolean value. For this class, -the marker type 'bool' is used to indicate that internal storage should -be used.

- -

- - -

- The `cl::bits` class -

- -

The cl::bits class is the class used to represent a list of command -line options in the form of a bit vector. It is also a templated class which -can take up to three arguments:

- -

-namespace cl {
-  template <class DataType, class Storage = bool,
-            class ParserClass = parser<DataType> >
-  class bits;
-}
-

- -

This class works the exact same as the cl::lists class, except that the second argument -must be of type unsigned if external storage is used.

- -

- - -

- The `cl::alias` class -

- -

The cl::alias class is a nontemplated class that is used to form -aliases for other arguments.

- -

-namespace cl {
-  class alias;
-}
-

- -

The cl::aliasopt attribute should be -used to specify which option this is an alias for. Alias arguments default to -being Hidden, and use the aliased options parser to do -the conversion from string to data.

- -

- - -

- The `cl::extrahelp` class -

- -

The cl::extrahelp class is a nontemplated class that allows extra -help text to be printed out for the -help option.

- -

-namespace cl {
-  struct extrahelp;
-}
-

- -

To use the extrahelp, simply construct one with a const char* -parameter to the constructor. The text passed to the constructor will be printed -at the bottom of the help message, verbatim. Note that multiple -cl::extrahelp can be used, but this practice is discouraged. If -your tool needs to print additional help information, put all that help into a -single cl::extrahelp instance.

For example:

-  cl::extrahelp("\nADDITIONAL HELP:\n\n  This is the extra help\n");
-

- -

- - -

- Builtin parsers -

- -

Parsers control how the string value taken from the command line is -translated into a typed value, suitable for use in a C++ program. By default, -the CommandLine library uses an instance of parser<type> if the -command line option specifies that it uses values of type 'type'. -Because of this, custom option processing is specified with specializations of -the 'parser' class.

- -

The CommandLine library provides the following builtin parser -specializations, which are sufficient for most applications. It can, however, -also be extended to work with new data types and new ways of interpreting the -same data. See the Writing a Custom Parser for more -details on this type of library extension.

- -

The generic parser<t> parser -can be used to map strings values to any data type, through the use of the cl::values property, which specifies the mapping -information. The most common use of this parser is for parsing enum values, -which allows you to use the CommandLine library for all of the error checking to -make sure that only valid enum values are specified (as opposed to accepting -arbitrary strings). Despite this, however, the generic parser class can be used -for any data type.
The parser<bool> specialization -is used to convert boolean strings to a boolean value. Currently accepted -strings are "true", "TRUE", "True", "1", -"false", "FALSE", "False", and "0".
The parser<boolOrDefault> - specialization is used for cases where the value is boolean, -but we also need to know whether the option was specified at all. boolOrDefault -is an enum with 3 values, BOU_UNSET, BOU_TRUE and BOU_FALSE. This parser accepts -the same strings as parser<bool>.
The parser<string> -specialization simply stores the parsed string into the string value -specified. No conversion or modification of the data is performed.
The parser<int> specialization -uses the C strtol function to parse the string input. As such, it will -accept a decimal number (with an optional '+' or '-' prefix) which must start -with a non-zero digit. It accepts octal numbers, which are identified with a -'0' prefix digit, and hexadecimal numbers with a prefix of -'0x' or '0X'.
The parser<double> and -parser<float> specializations use the standard C -strtod function to convert floating point strings into floating point -values. As such, a broad range of string formats is supported, including -exponential notation (ex: 1.7e15) and properly supports locales. -

- -

- Extension Guide -

- -

Although the CommandLine library has a lot of functionality built into it -already (as discussed previously), one of its true strengths lie in its -extensibility. This section discusses how the CommandLine library works under -the covers and illustrates how to do some simple, common, extensions.

- - -

- Writing a custom parser -

- -

One of the simplest and most common extensions is the use of a custom parser. -As discussed previously, parsers are the portion -of the CommandLine library that turns string input from the user into a -particular parsed data type, validating the input in the process.

- -

There are two ways to use a new parser:

- -

- -
Specialize the cl::parser template for -your custom data type.
- -
This approach has the advantage that users of your custom data type will -automatically use your custom parser whenever they define an option with a value -type of your data type. The disadvantage of this approach is that it doesn't -work if your fundamental data type is something that is already supported.
- -
- -
Write an independent class, using it explicitly from options that need -it.
- -
This approach works well in situations where you would line to parse an -option using special syntax for a not-very-special data-type. The drawback of -this approach is that users of your parser have to be aware that they are using -your parser instead of the builtin ones.
- -

- -

To guide the discussion, we will discuss a custom parser that accepts file -sizes, specified with an optional unit after the numeric size. For example, we -would like to parse "102kb", "41M", "1G" into the appropriate integer value. In -this case, the underlying data type we want to parse into is -'unsigned'. We choose approach #2 above because we don't want to make -this the default for all unsigned options.

- -

To start out, we declare our new FileSizeParser class:

- -

-struct FileSizeParser : public cl::basic_parser<unsigned> {
-  // parse - Return true on error.
-  bool parse(cl::Option &O, const char *ArgName, const std::string &ArgValue,
-             unsigned &Val);
-};
-

- -

Our new class inherits from the cl::basic_parser template class to -fill in the default, boiler plate code for us. We give it the data type that -we parse into, the last argument to the parse method, so that clients of -our custom parser know what object type to pass in to the parse method. (Here we -declare that we parse into 'unsigned' variables.)

- -

For most purposes, the only method that must be implemented in a custom -parser is the parse method. The parse method is called -whenever the option is invoked, passing in the option itself, the option name, -the string to parse, and a reference to a return value. If the string to parse -is not well-formed, the parser should output an error message and return true. -Otherwise it should return false and set 'Val' to the parsed value. In -our example, we implement parse as:

- -

-bool FileSizeParser::parse(cl::Option &O, const char *ArgName,
-                           const std::string &Arg, unsigned &Val) {
-  const char *ArgStart = Arg.c_str();
-  char *End;
-
-  // Parse integer part, leaving 'End' pointing to the first non-integer char
-  Val = (unsigned)strtol(ArgStart, &End, 0);
-
-  while (1) {
-    switch (*End++) {
-    case 0: return false;   // No error
-    case 'i':               // Ignore the 'i' in KiB if people use that
-    case 'b': case 'B':     // Ignore B suffix
-      break;
-
-    case 'g': case 'G': Val *= 1024*1024*1024; break;
-    case 'm': case 'M': Val *= 1024*1024;      break;
-    case 'k': case 'K': Val *= 1024;           break;
-
-    default:
-      // Print an error message if unrecognized character!
-      return O.error("'" + Arg + "' value invalid for file size argument!");
-    }
-  }
-}
-

- -

This function implements a very simple parser for the kinds of strings we are -interested in. Although it has some holes (it allows "123KKK" for -example), it is good enough for this example. Note that we use the option -itself to print out the error message (the error method always returns -true) in order to get a nice error message (shown below). Now that we have our -parser class, we can use it like this:

- -

-static cl::opt<unsigned, false, FileSizeParser>
-MFS("max-file-size", cl::desc("Maximum file size to accept"),
-    cl::value_desc("size"));
-

- -

Which adds this to the output of our program:

- -

-OPTIONS:
-  -help                 - display available options (-help-hidden for more)
-  ...
-  -max-file-size=<size> - Maximum file size to accept
-

- -

And we can test that our parse works correctly now (the test program just -prints out the max-file-size argument value):

- -

-$ ./test
-MFS: 0
-$ ./test -max-file-size=123MB
-MFS: 128974848
-$ ./test -max-file-size=3G
-MFS: 3221225472
-$ ./test -max-file-size=dog
--max-file-size option: 'dog' value invalid for file size argument!
-

- -

It looks like it works. The error message that we get is nice and helpful, -and we seem to accept reasonable file sizes. This wraps up the "custom parser" -tutorial.

- -

- - -

- Exploiting external storage -

- -

Several of the LLVM libraries define static cl::opt instances that - will automatically be included in any program that links with that library. - This is a feature. However, sometimes it is necessary to know the value of the - command line option outside of the library. In these cases the library does or - should provide an external storage location that is accessible to users of the - library. Examples of this include the llvm::DebugFlag exported by the - lib/Support/Debug.cpp file and the llvm::TimePassesIsEnabled - flag exported by the lib/VMCore/PassManager.cpp file.

- -

TODO: complete this section

- -

- - -

- Dynamically adding command line options -

- -

TODO: fill in this section

- -

- CommandLine 2.0 Library Manual -

- Introduction -

- Quick Start Guide -

- Boolean Arguments -

- Argument Aliases -

- Selecting an alternative from a set of - possibilities -

- Named Alternatives -

- Parsing a list of options -

- Collecting options as a set of flags -

- Adding freeform text to help output -

- Reference Guide -

- Positional Arguments -

- Specifying positional options with hyphens -

- Determining absolute position with getPosition() -

- The `cl::ConsumeAfter` modifier -

- Internal vs External Storage -

- Option Attributes -

- Option Modifiers -

- Hiding an option from `-help` output -

- Controlling the number of occurrences required and - allowed -

- Controlling whether or not a value must be specified -

- Controlling other formatting options -

- Miscellaneous option modifiers -

- Response files -

- Top-Level Classes and Functions -

- The `cl::ParseCommandLineOptions` - function -

- The `cl::ParseEnvironmentOptions` - function -

- The `cl::SetVersionPrinter` - function -

- The `cl::opt` class -

- The `cl::list` class -

- The `cl::bits` class -

- The `cl::alias` class -

- The `cl::extrahelp` class -

- Builtin parsers -

- Extension Guide -

- Writing a custom parser -

- Exploiting external storage -

- Dynamically adding command line options -

- CommandLine 2.0 Library Manual -

- Introduction -

- Quick Start Guide -

- Boolean Arguments -

- Argument Aliases -

- Selecting an alternative from a set of - possibilities -

- Named Alternatives -

- Parsing a list of options -

- Collecting options as a set of flags -

- Adding freeform text to help output -

- Reference Guide -

- Positional Arguments -

- Specifying positional options with hyphens -

- Determining absolute position with getPosition() -

- The cl::ConsumeAfter modifier -

- Internal vs External Storage -

- Option Attributes -

- Option Modifiers -

- Hiding an option from -help output -

- Controlling the number of occurrences required and - allowed -

- Controlling whether or not a value must be specified -

- Controlling other formatting options -

- Miscellaneous option modifiers -

- Response files -

- Top-Level Classes and Functions -

- The cl::ParseCommandLineOptions - function -

- The cl::ParseEnvironmentOptions - function -

- The cl::SetVersionPrinter - function -

- The cl::opt class -

- The cl::list class -

- The cl::bits class -

- The cl::alias class -

- The cl::extrahelp class -

- Builtin parsers -

- Extension Guide -

- Writing a custom parser -

- Exploiting external storage -

- Dynamically adding command line options -

- The `cl::ConsumeAfter` modifier -

- Hiding an option from `-help` output -

- The `cl::ParseCommandLineOptions` - function -

- The `cl::ParseEnvironmentOptions` - function -

- The `cl::SetVersionPrinter` - function -

- The `cl::opt` class -

- The `cl::list` class -

- The `cl::bits` class -

- The `cl::alias` class -

- The `cl::extrahelp` class -