# # For a description of the syntax of this configuration file, # see scripts/kbuild/config-language.txt. # config KEMBTK_BUSYB_UDHCPC6 bool "udhcp client for DHCPv6 (udhcpc6)" help udhcpc6 is a DHCPv6 client config KEMBTK_BUSYB_UDHCPD bool "udhcp server (udhcpd)" default y select KEMBTK_BUSYB_PLATFORM_LINUX help udhcpd is a DHCP server geared primarily toward embedded systems, while striving to be fully functional and RFC compliant. config KEMBTK_BUSYB_DHCPRELAY bool "dhcprelay" default y depends on KEMBTK_BUSYB_UDHCPD help dhcprelay listens for dhcp requests on one or more interfaces and forwards these requests to a different interface or dhcp server. config KEMBTK_BUSYB_DUMPLEASES bool "Lease display utility (dumpleases)" default y depends on KEMBTK_BUSYB_UDHCPD help dumpleases displays the leases written out by the udhcpd server. Lease times are stored in the file by time remaining in lease, or by the absolute time that it expires in seconds from epoch. config KEMBTK_BUSYB_FEATURE_UDHCPD_WRITE_LEASES_EARLY bool "Rewrite the lease file at every new acknowledge" default y depends on KEMBTK_BUSYB_UDHCPD help If selected, udhcpd will write a new file with leases every time a new lease has been accepted, thus eliminating the need to send SIGUSR1 for the initial writing or updating. Any timed rewriting remains undisturbed. config KEMBTK_BUSYB_FEATURE_UDHCPD_BASE_IP_ON_MAC bool "Select KEMBTK_BUSYB_IP address based on client MAC" depends on KEMBTK_BUSYB_UDHCPD help If selected, udhcpd will base its selection of KEMBTK_BUSYB_IP address to offer on the client's hardware address. Otherwise udhcpd uses the next consecutive free address. This reduces the frequency of KEMBTK_BUSYB_IP address changes for clients which let their lease expire, and makes consecutive DHCPOFFERS for the same client to (almost always) contain the same KEMBTK_BUSYB_IP address. config KEMBTK_BUSYB_DHCPD_LEASES_FILE string "Absolute path to lease file" default "/var/lib/misc/udhcpd.leases" depends on KEMBTK_BUSYB_UDHCPD help udhcpd stores addresses in a lease file. This is the absolute path of the file. Normally it is safe to leave it untouched. config KEMBTK_BUSYB_UDHCPC bool "udhcp client (udhcpc)" default y select KEMBTK_BUSYB_PLATFORM_LINUX help udhcpc is a DHCP client geared primarily toward embedded systems, while striving to be fully functional and RFC compliant. The udhcp client negotiates a lease with the DHCP server and runs a script when a lease is obtained or lost. config KEMBTK_BUSYB_FEATURE_UDHCPC_ARPING bool "Verify that the offered address is free, using KEMBTK_BUSYB_ARP ping" default y depends on KEMBTK_BUSYB_UDHCPC help If selected, udhcpc will send KEMBTK_BUSYB_ARP probes and make sure the offered address is really not in use by anyone. The client will DHCPDECLINE the offer if the address is in use, and restart the discover process. config KEMBTK_BUSYB_FEATURE_UDHCP_PORT bool "Enable '-P port' option for udhcpd and udhcpc" depends on KEMBTK_BUSYB_UDHCPD || KEMBTK_BUSYB_UDHCPC help At the cost of ~300 bytes, enables -P port option. This feature is typically not needed. config KEMBTK_BUSYB_UDHCP_DEBUG int "Maximum verbosity level for udhcp applets (0..9)" default 9 range 0 9 depends on KEMBTK_BUSYB_UDHCPD || KEMBTK_BUSYB_UDHCPC || KEMBTK_BUSYB_DHCPRELAY help Verbosity can be increased with multiple -v options. This option controls how high it can be cranked up. Bigger values result in bigger code. Levels above 1 are very verbose and useful for debugging only. config KEMBTK_BUSYB_FEATURE_UDHCP_RFC3397 bool "Support for RFC3397 domain search (experimental)" default y depends on KEMBTK_BUSYB_UDHCPD || KEMBTK_BUSYB_UDHCPC help If selected, both client and server will support passing of domain search lists via option 119, specified in RFC 3397, and SIP servers option 120, specified in RFC 3361. config KEMBTK_BUSYB_FEATURE_UDHCP_8021Q bool "Support for 802.1Q VLAN parameters" default y depends on KEMBTK_BUSYB_UDHCPD || KEMBTK_BUSYB_UDHCPC help If selected, both client and server will support passing of VLAN KEMBTK_BUSYB_ID and priority via options 132 and 133 as per 802.1Q. config KEMBTK_BUSYB_UDHCPC_DEFAULT_SCRIPT string "Absolute path to config script" default "/usr/share/udhcpc/default.script" depends on KEMBTK_BUSYB_UDHCPC help This script is called after udhcpc receives an answer. See examples/udhcp for a working example. Normally it is safe to leave this untouched. config KEMBTK_BUSYB_UDHCPC_SLACK_FOR_BUGGY_SERVERS int "DHCP options slack buffer size" default 80 range 0 924 depends on KEMBTK_BUSYB_UDHCPD || KEMBTK_BUSYB_UDHCPC help Some buggy DHCP servers send DHCP offer packets with option field larger than we expect (which might also be considered a buffer overflow attempt). These packets are normally discarded. If circumstances beyond your control force you to support such servers, this may help. The upper limit (924) makes dhcpc accept even 1500 byte packets (maximum-sized ethernet packets). This option does not make dhcp[cd] emit non-standard sized packets. Known buggy DHCP servers: 3Com OfficeConnect Remote 812 ADSL Router: seems to confuse maximum allowed UDP packet size with maximum size of entire KEMBTK_BUSYB_IP packet, and sends packets which are 28 bytes too large. Seednet (ISP) VDSL: sends packets 2 bytes too large.