diff options
Diffstat (limited to 'scripts/kconfig/Makefile')
-rw-r--r-- | scripts/kconfig/Makefile | 276 |
1 files changed, 160 insertions, 116 deletions
diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 41a374d..3ad439c 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -2,7 +2,8 @@ # Kernel configuration targets # These targets are used from top-level makefile -PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config +PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \ + localmodconfig localyesconfig ifdef KBUILD_KCONFIG Kconfig := $(KBUILD_KCONFIG) @@ -20,27 +21,71 @@ menuconfig: $(obj)/mconf $< $(Kconfig) config: $(obj)/conf + $< --oldaskconfig $(Kconfig) + +nconfig: $(obj)/nconf $< $(Kconfig) oldconfig: $(obj)/conf - $< -o $(Kconfig) + $< --$@ $(Kconfig) silentoldconfig: $(obj)/conf - $< -s $(Kconfig) + $(Q)mkdir -p include/generated + $< --$@ $(Kconfig) + +# if no path is given, then use src directory to find file +ifdef LSMOD +LSMOD_F := $(LSMOD) +ifeq ($(findstring /,$(LSMOD)),) + LSMOD_F := $(objtree)/$(LSMOD) +endif +endif + +localmodconfig: $(obj)/streamline_config.pl $(obj)/conf + $(Q)mkdir -p include/generated + $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config + $(Q)if [ -f .config ]; then \ + cmp -s .tmp.config .config || \ + (mv -f .config .config.old.1; \ + mv -f .tmp.config .config; \ + $(obj)/conf --silentoldconfig $(Kconfig); \ + mv -f .config.old.1 .config.old) \ + else \ + mv -f .tmp.config .config; \ + $(obj)/conf --silentoldconfig $(Kconfig); \ + fi + $(Q)rm -f .tmp.config + +localyesconfig: $(obj)/streamline_config.pl $(obj)/conf + $(Q)mkdir -p include/generated + $(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config + $(Q)sed -i s/=m/=y/ .tmp.config + $(Q)if [ -f .config ]; then \ + cmp -s .tmp.config .config || \ + (mv -f .config .config.old.1; \ + mv -f .tmp.config .config; \ + $(obj)/conf --silentoldconfig $(Kconfig); \ + mv -f .config.old.1 .config.old) \ + else \ + mv -f .tmp.config .config; \ + $(obj)/conf --silentoldconfig $(Kconfig); \ + fi + $(Q)rm -f .tmp.config # Create new linux.pot file # Adjust charset to UTF-8 in .po file to accept UTF-8 in Kconfig files # The symlink is used to repair a deficiency in arch/um update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h $(Q)echo " GEN config" - $(Q)xgettext --default-domain=linux \ - --add-comments --keyword=_ --keyword=N_ \ - --from-code=UTF-8 \ - --files-from=scripts/kconfig/POTFILES.in \ + $(Q)xgettext --default-domain=linux \ + --add-comments --keyword=_ --keyword=N_ \ + --from-code=UTF-8 \ + --files-from=$(srctree)/scripts/kconfig/POTFILES.in \ + --directory=$(srctree) --directory=$(objtree) \ --output $(obj)/config.pot $(Q)sed -i s/CHARSET/UTF-8/ $(obj)/config.pot - $(Q)ln -fs Kconfig.i386 arch/um/Kconfig.arch - $(Q)(for i in `ls arch/*/Kconfig`; \ + $(Q)ln -fs Kconfig.x86 arch/um/Kconfig + $(Q)(for i in `ls $(srctree)/arch/*/Kconfig`; \ do \ echo " GEN $$i"; \ $(obj)/kxgettext $$i \ @@ -48,63 +93,68 @@ update-po-config: $(obj)/kxgettext $(obj)/gconf.glade.h done ) $(Q)msguniq --sort-by-file --to-code=UTF-8 $(obj)/config.pot \ --output $(obj)/linux.pot - $(Q)rm -f arch/um/Kconfig.arch + $(Q)rm -f $(srctree)/arch/um/Kconfig $(Q)rm -f $(obj)/config.pot -PHONY += randconfig allyesconfig allnoconfig allmodconfig defconfig +PHONY += allnoconfig allyesconfig allmodconfig alldefconfig randconfig -randconfig: $(obj)/conf - $< -r $(Kconfig) +allnoconfig allyesconfig allmodconfig alldefconfig randconfig: $(obj)/conf + $< --$@ $(Kconfig) -allyesconfig: $(obj)/conf - $< -y $(Kconfig) +PHONY += listnewconfig oldnoconfig savedefconfig defconfig -allnoconfig: $(obj)/conf - $< -n $(Kconfig) +listnewconfig oldnoconfig: $(obj)/conf + $< --$@ $(Kconfig) -allmodconfig: $(obj)/conf - $< -m $(Kconfig) +savedefconfig: $(obj)/conf + $< --$@=defconfig $(Kconfig) defconfig: $(obj)/conf ifeq ($(KBUILD_DEFCONFIG),) - $< -d $(Kconfig) + $< --defconfig $(Kconfig) else @echo "*** Default configuration is based on '$(KBUILD_DEFCONFIG)'" - $(Q)$< -D arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) + $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG) $(Kconfig) endif %_defconfig: $(obj)/conf - $(Q)$< -D arch/$(SRCARCH)/configs/$@ $(Kconfig) + $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) # Help text used by make help help: @echo ' config - Update current config utilising a line-oriented program' + @echo ' nconfig - Update current config utilising a ncurses menu based program' @echo ' menuconfig - Update current config utilising a menu based program' @echo ' xconfig - Update current config utilising a QT based front-end' @echo ' gconfig - Update current config utilising a GTK based front-end' @echo ' oldconfig - Update current config utilising a provided .config as base' - @echo ' silentoldconfig - Same as oldconfig, but quietly' - @echo ' randconfig - New config with random answer to all options' - @echo ' defconfig - New config with default answer to all options' - @echo ' allmodconfig - New config selecting modules when possible' - @echo ' allyesconfig - New config where all options are accepted with yes' + @echo ' localmodconfig - Update current config disabling modules not loaded' + @echo ' localyesconfig - Update current config converting local mods to core' + @echo ' silentoldconfig - Same as oldconfig, but quietly, additionally update deps' + @echo ' defconfig - New config with default from ARCH supplied defconfig' + @echo ' savedefconfig - Save current config as ./defconfig (minimal config)' @echo ' allnoconfig - New config where all options are answered with no' + @echo ' allyesconfig - New config where all options are accepted with yes' + @echo ' allmodconfig - New config selecting modules when possible' + @echo ' alldefconfig - New config with all symbols set to default' + @echo ' randconfig - New config with random answer to all options' + @echo ' listnewconfig - List new options' + @echo ' oldnoconfig - Same as silentoldconfig but set new symbols to n (unset)' # lxdialog stuff -check-lxdialog := scripts/kconfig/lxdialog/check-lxdialog.sh +check-lxdialog := $(src)/lxdialog/check-lxdialog.sh # Use recursively expanded variables so we do not call gcc unless # we really need to do so. (Do not call gcc as part of make mrproper) -HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) -HOST_LOADLIBES = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) - -HOST_EXTRACFLAGS += -DLOCALE - +HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \ + -DLOCALE # =========================================================================== # Shared Makefile for the various kconfig executables: # conf: Used for defconfig, oldconfig and related targets -# mconf: Used for the mconfig target. +# nconf: Used for the nconfig target. +# Utilizes ncurses +# mconf: Used for the menuconfig target # Utilizes the lxdialog package # qconf: Used for the xconfig target # Based on QT which needs to be installed to compile it @@ -116,15 +166,27 @@ lxdialog := lxdialog/checklist.o lxdialog/util.o lxdialog/inputbox.o lxdialog += lxdialog/textbox.o lxdialog/yesno.o lxdialog/menubox.o conf-objs := conf.o zconf.tab.o -mconf-objs := mconf.o zconf.tab.o $(lxdialog) +mconf-objs := mconf.o zconf.tab.o $(lxdialog) +nconf-objs := nconf.o zconf.tab.o nconf.gui.o kxgettext-objs := kxgettext.o zconf.tab.o +qconf-cxxobjs := qconf.o +qconf-objs := zconf.tab.o +gconf-objs := gconf.o zconf.tab.o -hostprogs-y := conf qconf gconf kxgettext +hostprogs-y := conf + +ifeq ($(MAKECMDGOALS),nconfig) + hostprogs-y += nconf +endif ifeq ($(MAKECMDGOALS),menuconfig) hostprogs-y += mconf endif +ifeq ($(MAKECMDGOALS),update-po-config) + hostprogs-y += kxgettext +endif + ifeq ($(MAKECMDGOALS),xconfig) qconf-target := 1 endif @@ -134,41 +196,46 @@ endif ifeq ($(qconf-target),1) -qconf-cxxobjs := qconf.o -qconf-objs := kconfig_load.o zconf.tab.o + hostprogs-y += qconf endif ifeq ($(gconf-target),1) -gconf-objs := gconf.o kconfig_load.o zconf.tab.o + hostprogs-y += gconf endif -clean-files := lkc_defs.h qconf.moc .tmp_qtcheck \ - .tmp_gtkcheck zconf.tab.c lex.zconf.c zconf.hash.c gconf.glade.h -clean-files += mconf qconf gconf *.o .*.cmd lxdialog/*.o lxdialog/.*.cmd +clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck +clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h +clean-files += mconf qconf gconf nconf clean-files += config.pot linux.pot # Check that we have the required ncurses stuff installed for lxdialog (menuconfig) PHONY += $(obj)/dochecklxdialog $(addprefix $(obj)/,$(lxdialog)): $(obj)/dochecklxdialog $(obj)/dochecklxdialog: - $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOST_LOADLIBES) + $(Q)$(CONFIG_SHELL) $(check-lxdialog) -check $(HOSTCC) $(HOST_EXTRACFLAGS) $(HOSTLOADLIBES_mconf) always := dochecklxdialog # Add environment specific flags -HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) scripts/kconfig/check.sh $(HOSTCC) $(HOSTCFLAGS)) +HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(src)/check.sh $(HOSTCC) $(HOSTCFLAGS)) # generated files seem to need this to find local include files -HOSTCFLAGS_lex.zconf.o := -I$(src) +HOSTCFLAGS_zconf.lex.o := -I$(src) HOSTCFLAGS_zconf.tab.o := -I$(src) -HOSTLOADLIBES_qconf = $(KC_QT_LIBS) -ldl -HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) -D LKC_DIRECT_LINK +LEX_PREFIX_zconf := zconf +YACC_PREFIX_zconf := zconf + +HOSTLOADLIBES_qconf = $(KC_QT_LIBS) +HOSTCXXFLAGS_qconf.o = $(KC_QT_CFLAGS) HOSTLOADLIBES_gconf = `pkg-config --libs gtk+-2.0 gmodule-2.0 libglade-2.0` HOSTCFLAGS_gconf.o = `pkg-config --cflags gtk+-2.0 gmodule-2.0 libglade-2.0` \ - -D LKC_DIRECT_LINK + -Wno-missing-prototypes +HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC)) + +HOSTLOADLIBES_nconf = -lmenu -lpanel -lncurses $(obj)/qconf.o: $(obj)/.tmp_qtcheck ifeq ($(qconf-target),1) @@ -178,40 +245,48 @@ $(obj)/.tmp_qtcheck: $(src)/Makefile # QT needs some extra effort... $(obj)/.tmp_qtcheck: @set -e; echo " CHECK qt"; dir=""; pkg=""; \ - pkg-config --exists qt 2> /dev/null && pkg=qt; \ - pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ - if [ -n "$$pkg" ]; then \ - cflags="\$$(shell pkg-config $$pkg --cflags)"; \ - libs="\$$(shell pkg-config $$pkg --libs)"; \ - moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ - dir="$$(pkg-config $$pkg --variable=prefix)"; \ + if ! pkg-config --exists QtCore 2> /dev/null; then \ + echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \ + pkg-config --exists qt 2> /dev/null && pkg=qt; \ + pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \ + if [ -n "$$pkg" ]; then \ + cflags="\$$(shell pkg-config $$pkg --cflags)"; \ + libs="\$$(shell pkg-config $$pkg --libs)"; \ + moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \ + dir="$$(pkg-config $$pkg --variable=prefix)"; \ + else \ + for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ + if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ + done; \ + if [ -z "$$dir" ]; then \ + echo "*"; \ + echo "* Unable to find any QT installation. Please make sure that"; \ + echo "* the QT4 or QT3 development package is correctly installed and"; \ + echo "* either qmake can be found or install pkg-config or set"; \ + echo "* the QTDIR environment variable to the correct location."; \ + echo "*"; \ + false; \ + fi; \ + libpath=$$dir/lib; lib=qt; osdir=""; \ + $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ + osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ + test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ + test -f $$libpath/libqt-mt.so && lib=qt-mt; \ + cflags="-I$$dir/include"; \ + libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ + moc="$$dir/bin/moc"; \ + fi; \ + if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ + echo "*"; \ + echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ + echo "*"; \ + moc="/usr/bin/moc"; \ + fi; \ else \ - for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \ - if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \ - done; \ - if [ -z "$$dir" ]; then \ - echo "*"; \ - echo "* Unable to find the QT3 installation. Please make sure that"; \ - echo "* the QT3 development package is correctly installed and"; \ - echo "* either install pkg-config or set the QTDIR environment"; \ - echo "* variable to the correct location."; \ - echo "*"; \ - false; \ - fi; \ - libpath=$$dir/lib; lib=qt; osdir=""; \ - $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \ - osdir=x$$($(HOSTCXX) -print-multi-os-directory); \ - test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \ - test -f $$libpath/libqt-mt.so && lib=qt-mt; \ - cflags="-I$$dir/include"; \ - libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \ - moc="$$dir/bin/moc"; \ - fi; \ - if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \ - echo "*"; \ - echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \ - echo "*"; \ - moc="/usr/bin/moc"; \ + cflags="\$$(shell pkg-config QtCore QtGui Qt3Support --cflags)"; \ + libs="\$$(shell pkg-config QtCore QtGui Qt3Support --libs)"; \ + binpath="\$$(shell pkg-config QtCore --variable=prefix)"; \ + moc="$$binpath/bin/moc"; \ fi; \ echo "KC_QT_CFLAGS=$$cflags" > $@; \ echo "KC_QT_LIBS=$$libs" >> $@; \ @@ -244,46 +319,15 @@ $(obj)/.tmp_gtkcheck: fi endif -$(obj)/zconf.tab.o: $(obj)/lex.zconf.c $(obj)/zconf.hash.c - -$(obj)/kconfig_load.o: $(obj)/lkc_defs.h - -$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/lkc_defs.h +$(obj)/zconf.tab.o: $(obj)/zconf.lex.c $(obj)/zconf.hash.c -$(obj)/gconf.o: $(obj)/lkc_defs.h +$(obj)/qconf.o: $(obj)/qconf.moc $(obj)/%.moc: $(src)/%.h $(KC_QT_MOC) -i $< -o $@ -$(obj)/lkc_defs.h: $(src)/lkc_proto.h - sed < $< > $@ 's/P(\([^,]*\),.*/#define \1 (\*\1_p)/' - # Extract gconf menu items for I18N support $(obj)/gconf.glade.h: $(obj)/gconf.glade - intltool-extract --type=gettext/glade $(obj)/gconf.glade - -### -# The following requires flex/bison/gperf -# By default we use the _shipped versions, uncomment the following line if -# you are modifying the flex/bison src. -# LKC_GENPARSER := 1 - -ifdef LKC_GENPARSER - -$(obj)/zconf.tab.c: $(src)/zconf.y -$(obj)/lex.zconf.c: $(src)/zconf.l -$(obj)/zconf.hash.c: $(src)/zconf.gperf + $(Q)intltool-extract --type=gettext/glade --srcdir=$(srctree) \ + $(obj)/gconf.glade -%.tab.c: %.y - bison -l -b $* -p $(notdir $*) $< - cp $@ $@_shipped - -lex.%.c: %.l - flex -L -P$(notdir $*) -o$@ $< - cp $@ $@_shipped - -%.hash.c: %.gperf - gperf < $< > $@ - cp $@ $@_shipped - -endif |