/*This file is prepared for Doxygen automatic documentation generation.*/ /*! \file ********************************************************************* * * \brief FreeRTOS demonstration for AVR32 UC3. * * - Compiler: IAR EWAVR32 and GNU GCC for AVR32 * - Supported devices: All AVR32 devices can be used. * - AppNote: * * \author Atmel Corporation: http://www.atmel.com \n * Support and FAQ: http://support.atmel.no/ * ******************************************************************************/ /* Copyright (c) 2007, Atmel Corporation All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * 3. The name of ATMEL may not be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY ATMEL ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY AND * SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef FREERTOS_CONFIG_H #define FREERTOS_CONFIG_H #include "board.h" /*----------------------------------------------------------- * Application specific definitions. * * These definitions should be adjusted for your particular hardware and * application requirements. * * THESE PARAMETERS ARE DESCRIBED WITHIN THE 'CONFIGURATION' SECTION OF THE * FreeRTOS API DOCUMENTATION AVAILABLE ON THE FreeRTOS.org WEB SITE. * * See http://www.freertos.org/a00110.html. *----------------------------------------------------------*/ #define configUSE_PREEMPTION 1 #define configUSE_IDLE_HOOK 0 #define configUSE_TICK_HOOK 0 #define configCPU_CLOCK_HZ ( FOSC0 ) /* Hz clk gen */ #define configPBA_CLOCK_HZ ( FOSC0 ) #define configTICK_RATE_HZ ( ( portTickType ) 1000 ) #define configMAX_PRIORITIES ( ( unsigned portBASE_TYPE ) 8 ) #define configMINIMAL_STACK_SIZE ( ( unsigned portSHORT ) 128 ) /* configTOTAL_HEAP_SIZE is not used when heap_3.c is used. */ #define configTOTAL_HEAP_SIZE ( ( size_t ) ( 1024*25 ) ) #define configMAX_TASK_NAME_LEN ( 16 ) #define configUSE_TRACE_FACILITY 0 #define configUSE_16_BIT_TICKS 0 #define configIDLE_SHOULD_YIELD 1 /* Co-routine definitions. */ #define configUSE_CO_ROUTINES 0 #define configMAX_CO_ROUTINE_PRIORITIES ( 0 ) /* Set the following definitions to 1 to include the API function, or zero to exclude the API function. */ #define INCLUDE_vTaskPrioritySet 1 #define INCLUDE_uxTaskPriorityGet 1 #define INCLUDE_vTaskDelete 1 #define INCLUDE_vTaskCleanUpResources 0 #define INCLUDE_vTaskSuspend 1 #define INCLUDE_vTaskDelayUntil 1 #define INCLUDE_vTaskDelay 1 #define INCLUDE_xTaskGetCurrentTaskHandle 0 #define INCLUDE_xTaskGetSchedulerState 1 /* configTICK_USE_TC is a boolean indicating whether to use a Timer Counter for the tick generation. Timer Counter will generate an accurate Tick; otherwise the CPU will generate a tick but with time drift. configTICK_TC_CHANNEL is the TC channel. */ #define configTICK_USE_TC 1 #define configTICK_TC_CHANNEL 2 /* configHEAP_INIT is a boolean indicating whether to initialize the heap with 0xA5 in order to be able to determine the maximal heap consumption. */ #define configHEAP_INIT 0 /* Debug trace configuration. configDBG is a boolean indicating whether to activate the debug trace. */ #if BOARD == EVK1100 #define configDBG 1 #define configDBG_USART (&AVR32_USART1) #define configDBG_USART_RX_PIN AVR32_USART1_RXD_0_PIN #define configDBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_FUNCTION #define configDBG_USART_TX_PIN AVR32_USART1_TXD_0_PIN #define configDBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_FUNCTION #define configDBG_USART_BAUDRATE 57600 #define serialPORT_USART (&AVR32_USART0) #define serialPORT_USART_RX_PIN AVR32_USART0_RXD_0_PIN #define serialPORT_USART_RX_FUNCTION AVR32_USART0_RXD_0_FUNCTION #define serialPORT_USART_TX_PIN AVR32_USART0_TXD_0_PIN #define serialPORT_USART_TX_FUNCTION AVR32_USART0_TXD_0_FUNCTION #define serialPORT_USART_IRQ AVR32_USART0_IRQ #define serialPORT_USART_BAUDRATE 57600 #elif BOARD == EVK1101 #define configDBG 1 #define configDBG_USART (&AVR32_USART1) #define configDBG_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN #define configDBG_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION #define configDBG_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN #define configDBG_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION #define configDBG_USART_BAUDRATE 57600 #define serialPORT_USART (&AVR32_USART1) #define serialPORT_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN #define serialPORT_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION #define serialPORT_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN #define serialPORT_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION #define serialPORT_USART_IRQ AVR32_USART1_IRQ #define serialPORT_USART_BAUDRATE 57600 #endif #endif /* FREERTOS_CONFIG_H */