1 files changed, 192 insertions, 0 deletions
diff --git a/test/CodeGen/AArch64/func-argpassing.ll b/test/CodeGen/AArch64/func-argpassing.ll
new file mode 100644
index 0000000000..2c4dd03911
--- /dev/null
+++ b/test/CodeGen/AArch64/func-argpassing.ll
@@ -0,0 +1,192 @@
+; RUN: llc -verify-machineinstrs < %s -march=aarch64 | FileCheck %s
+
+%myStruct = type { i64 , i8, i32 }
+
+@var8 = global i8 0
+@var32 = global i32 0
+@var64 = global i64 0
+@var128 = global i128 0
+@varfloat = global float 0.0
+@vardouble = global double 0.0
+@varstruct = global %myStruct zeroinitializer
+
+define void @take_i8s(i8 %val1, i8 %val2) {
+; CHECK: take_i8s:
+    store i8 %val2, i8* @var8
+    ; Not using w1 may be technically allowed, but it would indicate a
+    ; problem in itself.
+;  CHECK: strb w1, [{{x[0-9]+}}, #:lo12:var8]
+    ret void
+}
+
+define void @add_floats(float %val1, float %val2) {
+; CHECK: add_floats:
+    %newval = fadd float %val1, %val2
+; CHECK: fadd [[ADDRES:s[0-9]+]], s0, s1
+    store float %newval, float* @varfloat
+; CHECK: str [[ADDRES]], [{{x[0-9]+}}, #:lo12:varfloat]
+    ret void
+}
+
+; byval pointers should be allocated to the stack and copied as if
+; with memcpy.
+define void @take_struct(%myStruct* byval %structval) {
+; CHECK: take_struct:
+    %addr0 = getelementptr %myStruct* %structval, i64 0, i32 2
+    %addr1 = getelementptr %myStruct* %structval, i64 0, i32 0
+
+    %val0 = load i32* %addr0
+    ; Some weird move means x0 is used for one access
+; CHECK: ldr [[REG32:w[0-9]+]], [{{x[0-9]+|sp}}, #12]
+    store i32 %val0, i32* @var32
+; CHECK: str [[REG32]], [{{x[0-9]+}}, #:lo12:var32]
+
+    %val1 = load i64* %addr1
+; CHECK: ldr [[REG64:x[0-9]+]], [{{x[0-9]+|sp}}]
+    store i64 %val1, i64* @var64
+; CHECK str [[REG64]], [{{x[0-9]+}}, #:lo12:var64]
+
+    ret void
+}
+
+; %structval should be at sp + 16
+define void @check_byval_align(i32* byval %ignore, %myStruct* byval align 16 %structval) {
+; CHECK: check_byval_align:
+
+    %addr0 = getelementptr %myStruct* %structval, i64 0, i32 2
+    %addr1 = getelementptr %myStruct* %structval, i64 0, i32 0
+
+    %val0 = load i32* %addr0
+    ; Some weird move means x0 is used for one access
+; CHECK: add x[[STRUCTVAL_ADDR:[0-9]+]], sp, #16
+; CHECK: ldr [[REG32:w[0-9]+]], [x[[STRUCTVAL_ADDR]], #12]
+    store i32 %val0, i32* @var32
+; CHECK: str [[REG32]], [{{x[0-9]+}}, #:lo12:var32]
+
+    %val1 = load i64* %addr1
+; CHECK: ldr [[REG64:x[0-9]+]], [sp, #16]
+    store i64 %val1, i64* @var64
+; CHECK str [[REG64]], [{{x[0-9]+}}, #:lo12:var64]
+
+    ret void
+}
+
+define i32 @return_int() {
+; CHECK: return_int:
+    %val = load i32* @var32
+    ret i32 %val
+; CHECK: ldr w0, [{{x[0-9]+}}, #:lo12:var32]
+    ; Make sure epilogue follows
+; CHECK-NEXT: ret
+}
+
+define double @return_double() {
+; CHECK: return_double:
+    ret double 3.14
+; CHECK: ldr d0, .LCPI
+}
+
+; This is the kind of IR clang will produce for returning a struct
+; small enough to go into registers. Not all that pretty, but it
+; works.
+define [2 x i64] @return_struct() {
+; CHECK: return_struct:
+    %addr = bitcast %myStruct* @varstruct to [2 x i64]*
+    %val = load [2 x i64]* %addr
+    ret [2 x i64] %val
+; CHECK: ldr x0, [{{x[0-9]+}}, #:lo12:varstruct]
+    ; Odd register regex below disallows x0 which we want to be live now.
+; CHECK: add {{x[1-9][0-9]*}}, {{x[1-9][0-9]*}}, #:lo12:varstruct
+; CHECK-NEXT: ldr x1, [{{x[1-9][0-9]*}}, #8]
+    ; Make sure epilogue immediately follows
+; CHECK-NEXT: ret
+}
+
+; Large structs are passed by reference (storage allocated by caller
+; to preserve value semantics) in x8. Strictly this only applies to
+; structs larger than 16 bytes, but C semantics can still be provided
+; if LLVM does it to %myStruct too. So this is the simplest check
+define void @return_large_struct(%myStruct* sret %retval) {
+; CHECK: return_large_struct:
+    %addr0 = getelementptr %myStruct* %retval, i64 0, i32 0
+    %addr1 = getelementptr %myStruct* %retval, i64 0, i32 1
+    %addr2 = getelementptr %myStruct* %retval, i64 0, i32 2
+
+    store i64 42, i64* %addr0
+    store i8 2, i8* %addr1
+    store i32 9, i32* %addr2
+; CHECK: str {{x[0-9]+}}, [x8]
+; CHECK: strb {{w[0-9]+}}, [x8, #8]
+; CHECK: str {{w[0-9]+}}, [x8, #12]
+
+    ret void
+}
+
+; This struct is just too far along to go into registers: (only x7 is
+; available, but it needs two). Also make sure that %stacked doesn't
+; sneak into x7 behind.
+define i32 @struct_on_stack(i8 %var0, i16 %var1, i32 %var2, i64 %var3, i128 %var45,
+                          i32* %var6, %myStruct* byval %struct, i32* byval %stacked,
+                          double %notstacked) {
+; CHECK: struct_on_stack:
+    %addr = getelementptr %myStruct* %struct, i64 0, i32 0
+    %val64 = load i64* %addr
+    store i64 %val64, i64* @var64
+    ; Currently nothing on local stack, so struct should be at sp
+; CHECK: ldr [[VAL64:x[0-9]+]], [sp]
+; CHECK: str [[VAL64]], [{{x[0-9]+}}, #:lo12:var64]
+
+    store double %notstacked, double* @vardouble
+; CHECK-NOT: ldr d0
+; CHECK: str d0, [{{x[0-9]+}}, #:lo12:vardouble
+
+    %retval = load i32* %stacked
+    ret i32 %retval
+; CHECK: ldr w0, [sp, #16]
+}
+
+define void @stacked_fpu(float %var0, double %var1, float %var2, float %var3,
+                         float %var4, float %var5, float %var6, float %var7,
+                         float %var8) {
+; CHECK: stacked_fpu:
+    store float %var8, float* @varfloat
+    ; Beware as above: the offset would be different on big-endian
+    ; machines if the first ldr were changed to use s-registers.
+; CHECK: ldr d[[VALFLOAT:[0-9]+]], [sp]
+; CHECK: str s[[VALFLOAT]], [{{x[0-9]+}}, #:lo12:varfloat]
+
+    ret void
+}
+
+; 128-bit integer types should be passed in xEVEN, xODD rather than
+; the reverse. In this case x2 and x3. Nothing should use x1.
+define i32 @check_i128_regalign(i32 %val0, i128 %val1, i32 %val2) {
+; CHECK: check_i128_regalign
+    store i128 %val1, i128* @var128
+; CHECK: str x2, [{{x[0-9]+}}, #:lo12:var128]
+; CHECK: str x3, [{{x[0-9]+}}, #8]
+
+    ret i32 %val2
+; CHECK: mov x0, x4
+}
+
+define void @check_i128_stackalign(i32 %val0, i32 %val1, i32 %val2, i32 %val3,
+                                   i32 %val4, i32 %val5, i32 %val6, i32 %val7,
+                                   i32 %stack1, i128 %stack2) {
+; CHECK: check_i128_stackalign
+    store i128 %stack2, i128* @var128
+    ; Nothing local on stack in current codegen, so first stack is 16 away
+; CHECK: ldr {{x[0-9]+}}, [sp, #16]
+    ; Important point is that we address sp+24 for second dword
+; CHECK: ldr {{x[0-9]+}}, [sp, #24]
+    ret void
+}
+
+declare void @llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
+
+define i32 @test_extern() {
+; CHECK: test_extern:
+  call void @llvm.memcpy.p0i8.p0i8.i32(i8* undef, i8* undef, i32 undef, i32 4, i1 0)
+; CHECK: bl memcpy
+  ret i32 0
+}