summaryrefslogtreecommitdiff
path: root/test/Transforms/LICM
Commit message (Collapse)AuthorAge
* [LPM] Switch LICM to actively use LCSSA in addition to preserving it.Chandler Carruth2014-02-11
| | | | | | | | | | | | | | | | | | | | | | | Fixes PR18753 and PR18782. This is necessary for LICM to preserve LCSSA correctly and efficiently. There is still some active discussion about whether we should be using LCSSA, but we can't just immediately stop using it and we *need* LICM to preserve it while we are using it. We can restore the old SSAUpdater driven code if and when there is a serious effort to remove the reliance on LCSSA from all of the loop passes. However, this also serves as a great example of why LCSSA is very nice to have. This change significantly simplifies the process of sinking instructions for LICM, and makes it quite a bit less expensive. It wouldn't even be as complex as it is except that I had to start the process of removing the big recursive LCSSA formation hammer in order to switch even this much of the re-forming code to asserting that LCSSA was preserved. I'll fully remove that next just to tidy things up until the LCSSA debate settles one way or the other. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201148 91177308-0d34-0410-b5e6-96231b3b80d8
* [LPM] Apply a really big hammer to fix PR18688 by recursively reformingChandler Carruth2014-02-01
| | | | | | | | | | | | | | | | | | | | LCSSA when we promote to SSA registers inside of LICM. Currently, this is actually necessary. The promotion logic in LICM uses SSAUpdater which doesn't understand how to place LCSSA PHI nodes. Teaching it to do so would be a very significant undertaking. It may be worthwhile and I've left a FIXME about this in the code as well as starting a thread on llvmdev to try to figure out the right long-term solution. For now, the PR needs to be fixed. Short of using the promition SSAUpdater to place both the LCSSA PHI nodes and the promoted PHI nodes, I don't see a cleaner or cheaper way of achieving this. Fortunately, LCSSA is relatively lazy and sparse -- it should only update instructions which need it. We can also skip the recursive variant when we don't promote to SSA values. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200612 91177308-0d34-0410-b5e6-96231b3b80d8
* [LPM] Make LCSSA a utility with a FunctionPass that applies it to allChandler Carruth2014-01-25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the loops in a function, and teach LICM to work in the presance of LCSSA. Previously, LCSSA was a loop pass. That made passes requiring it also be loop passes and unable to depend on function analysis passes easily. It also caused outer loops to have a different "canonical" form from inner loops during analysis. Instead, we go into LCSSA form and preserve it through the loop pass manager run. Note that this has the same problem as LoopSimplify that prevents enabling its verification -- loop passes which run at the end of the loop pass manager and don't preserve these are valid, but the subsequent loop pass runs of outer loops that do preserve this pass trigger too much verification and fail because the inner loop no longer verifies. The other problem this exposed is that LICM was completely unable to handle LCSSA form. It didn't preserve it and it actually would give up on moving instructions in many cases when they were used by an LCSSA phi node. I've taught LICM to support detecting LCSSA-form PHI nodes and to hoist and sink around them. This may actually let LICM fire significantly more because we put everything into LCSSA form to rotate the loop before running LICM. =/ Now LICM should handle that fine and preserve it correctly. The down side is that LICM has to require LCSSA in order to preserve it. This is just a fact of life for LCSSA. It's entirely possible we should completely remove LCSSA from the optimizer. The test updates are essentially accomodating LCSSA phi nodes in the output of LICM, and the fact that we now completely sink every instruction in ashr-crash below the loop bodies prior to unrolling. With this change, LCSSA is computed only three times in the pass pipeline. One of them could be removed (and potentially a SCEV run and a separate LoopPassManager entirely!) if we had a LoopPass variant of InstCombine that ran InstCombine on the loop body but refused to combine away LCSSA PHI nodes. Currently, this also prevents loop unrolling from being in the same loop pass manager is rotate, LICM, and unswitch. There is one thing that I *really* don't like -- preserving LCSSA in LICM is quite expensive. We end up having to re-run LCSSA twice for some loops after LICM runs because LICM can undo LCSSA both in the current loop and the parent loop. I don't really see good solutions to this other than to completely move away from LCSSA and using tools like SSAUpdater instead. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200067 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix broken CHECK lines.Benjamin Kramer2014-01-11
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199016 91177308-0d34-0410-b5e6-96231b3b80d8
* Debug Info: update testing cases to specify the debug info version number.Manman Ren2013-11-23
| | | | | | | | | | | We are going to drop debug info without a version number or with a different version number, to make sure we don't crash when we see bitcode files with different debug info metadata format. Make tests more robust by removing hard-coded metadata numbers in CHECK lines. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195535 91177308-0d34-0410-b5e6-96231b3b80d8
* Debug Info: In DIBuilder, the derived-from field of a DW_TAG_pointer_typeManman Ren2013-10-05
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | is updated to use DITypeRef. Move isUnsignedDIType and getOriginalTypeSize from DebugInfo.h to be static helper functions in DwarfCompileUnit. We already have a static helper function "isTypeSigned" in DwarfCompileUnit, and a pointer to DwarfDebug is added to resolve the derived-from field. All three functions need to go across link for derived-from fields, so we need to get hold of a type identifier map. A pointer to DwarfDebug is also added to DbgVariable in order to resolve the derived-from field. Debug info verifier is updated to check a derived-from field is a TypeRef. Verifier will not go across link for derived-from fields, in debug info finder, we go across the link to add derived-from fields to types. Function getDICompositeType is only used by dragonegg and since dragonegg does not generate identifier for types, we use an empty map to resolve the derived-from field. When printing a derived-from field, we use DITypeRef::getName to either return the type identifier or getName of the DIType. A paired commit at clang is required due to changes to DIBuilder. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192018 91177308-0d34-0410-b5e6-96231b3b80d8
* Temporarily revert r191792 as it is causing some LTO debug failuresEric Christopher2013-10-04
| | | | | | | on platforms with relocations in debug info and also temporarily revert r191800 due to conflicts with the revert of r191792. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191967 91177308-0d34-0410-b5e6-96231b3b80d8
* Debug Info: In DIBuilder, the derived-from field of a DW_TAG_pointer_typeManman Ren2013-10-01
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | is updated to use DITypeRef. Move isUnsignedDIType and getOriginalTypeSize from DebugInfo.h to be static helper functions in DwarfCompileUnit. We already have a static helper function "isTypeSigned" in DwarfCompileUnit, and a pointer to DwarfDebug is added to resolve the derived-from field. All three functions need to go across link for derived-from fields, so we need to get hold of a type identifier map. A pointer to DwarfDebug is also added to DbgVariable in order to resolve the derived-from field. Debug info verifier is updated to check a derived-from field is a TypeRef. Verifier will not go across link for derived-from fields, in debug info finder, we go across the link to add derived-from fields to types. Function getDICompositeType is only used by dragonegg and since dragonegg does not generate identifier for types, we use an empty map to resolve the derived-from field. When printing a derived-from field, we use DITypeRef::getName to either return the type identifier or getName of the DIType. A paired commit at clang is required due to changes to DIBuilder. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191800 91177308-0d34-0410-b5e6-96231b3b80d8
* TBAA: handle scalar TBAA format and struct-path aware TBAA format.Manman Ren2013-09-27
| | | | | | | | | | | | | | | | | Remove the command line argument "struct-path-tbaa" since we should not depend on command line argument to decide which format the IR file is using. Instead, we check the first operand of the tbaa tag node, if it is a MDNode, we treat it as struct-path aware TBAA format, otherwise, we treat it as scalar TBAA format. When clang starts to use struct-path aware TBAA format no matter whether struct-path-tbaa is no, and we can auto-upgrade existing bc files, the support for scalar TBAA format can be dropped. Existing testing cases are updated to use the struct-path aware TBAA format. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191538 91177308-0d34-0410-b5e6-96231b3b80d8
* Add testcase for r190631Krzysztof Parzyszek2013-09-16
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190807 91177308-0d34-0410-b5e6-96231b3b80d8
* Debug Info Testing: updated to use NULL instead of "i32 0" in a few fields.Manman Ren2013-09-06
| | | | | | | | | Field 2 of DIType (Context), field 9 of DIDerivedType (TypeDerivedFrom), field 12 of DICompositeType (ContainingType), fields 2, 7, 12 of DISubprogram (Context, Type, ContainingType). git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190205 91177308-0d34-0410-b5e6-96231b3b80d8
* Debug Info: add an identifier field to DICompositeType.Manman Ren2013-08-26
| | | | | | | | | | | | | | | | | | | DICompositeType will have an identifier field at position 14. For now, the field is set to null in DIBuilder. For DICompositeTypes where the template argument field (the 13th field) was optional, modify DIBuilder to make sure the template argument field is set. Now DICompositeType has 15 fields. Update DIBuilder to use NULL instead of "i32 0" for null value of a MDNode. Update verifier to check that DICompositeType has 15 fields and the last field is null or a MDString. Update testing cases to include an extra field for DICompositeType. The identifier field will be used by type uniquing so a front end can genearte a DICompositeType with a unique identifer. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189282 91177308-0d34-0410-b5e6-96231b3b80d8
* [tests] Cleanup initialization of test suffixes.Daniel Dunbar2013-08-16
| | | | | | | | | | | | | | | | | - Instead of setting the suffixes in a bunch of places, just set one master list in the top-level config. We now only modify the suffix list in a few suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py). - Aside from removing the need for a bunch of lit.local.cfg files, this enables 4 tests that were inadvertently being skipped (one in Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been XFAILED). - This commit also fixes a bunch of config files to use config.root instead of older copy-pasted code. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188513 91177308-0d34-0410-b5e6-96231b3b80d8
* Debug Info: enable verifier for testing cases.Manman Ren2013-07-29
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187375 91177308-0d34-0410-b5e6-96231b3b80d8
* Debug Info Verifier: verify SPs in llvm.dbg.sp.Manman Ren2013-07-27
| | | | | | | | | Also always add DIType, DISubprogram and DIGlobalVariable to the list in DebugInfoFinder without checking them, so we can verify them later on. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187285 91177308-0d34-0410-b5e6-96231b3b80d8
* Next batch of -disable-debug-info-verifier.Rafael Espindola2013-07-26
| | | | | | These tests fail without it if pipefail is enabled. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187205 91177308-0d34-0410-b5e6-96231b3b80d8
* Catch more CHECK that can be converted to CHECK-LABEL in Transforms for ↵Stephen Lin2013-07-14
| | | | | | | | | | | | | | | | | | | | | | | easier debugging. No functionality change. This conversion was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)define\([^@]*\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3define\4@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186269 91177308-0d34-0410-b5e6-96231b3b80d8
* Update Transforms tests to use CHECK-LABEL for easier debugging. No ↵Stephen Lin2013-07-14
| | | | | | | | | | | | | | | | | | | | | | | functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186268 91177308-0d34-0410-b5e6-96231b3b80d8
* Revert the test moves from 176733. Use "REQUIRES: asserts" instead.Jan Wen Voung2013-03-12
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176873 91177308-0d34-0410-b5e6-96231b3b80d8
* Disable statistics on Release builds and move tests that depend on -stats.Jan Wen Voung2013-03-08
| | | | | | | | | | | | | | | | | Summary: Statistics are still available in Release+Asserts (any +Asserts builds), and stats can also be turned on with LLVM_ENABLE_STATS. Move some of the FastISel stats that were moved under DEBUG() back out of DEBUG(), since stats are disabled across the board now. Many tests depend on grepping "-stats" output. Move those into a orig_dir/Stats/. so that they can be marked as unsupported when building without statistics. Differential Revision: http://llvm-reviews.chandlerc.com/D486 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176733 91177308-0d34-0410-b5e6-96231b3b80d8
* AArch64: adjust tests which rely on a default JITTim Northover2013-02-18
| | | | | | | | | | | | | Profiling tests *do* need a JIT. They'll pass if a cross-compiler targetting AArch64 by default has been built, but fail if a native AArch64 compiler has been build. Therefore XFAIL is inappropriate and we mark them unsupported. ExecutionEngine tests are JIT by definition, they should also be unsupported. Transforms/LICM only uses the interpreter to check the output is still sane after optimisation. It can be switched to use an interpreter. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175433 91177308-0d34-0410-b5e6-96231b3b80d8
* LICM: Hoist insertvalue/extractvalue out of loops.Benjamin Kramer2013-01-09
| | | | | | Fixes PR14854. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171984 91177308-0d34-0410-b5e6-96231b3b80d8
* tabs-to-spacesAndrew Trick2013-01-04
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171550 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix LICM's memory promotion optimization to preserve TBAA tags whenChris Lattner2012-12-31
| | | | | | | | promoting a store in a loop. This was noticed when working on PR14753, but isn't directly related. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171281 91177308-0d34-0410-b5e6-96231b3b80d8
* Tests: rewrite 'opt ... %s' to 'opt ... < %s' so that opt does not emit a ↵Dmitri Gribenko2012-12-30
| | | | | | | | | ModuleID This is done to avoid odd test failures, like the one fixed in r171243. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171250 91177308-0d34-0410-b5e6-96231b3b80d8
* Tests: rewrite 'opt ... %s' to 'opt ... < %s' so that opt does not emit a ↵Dmitri Gribenko2012-12-30
| | | | | | | | | ModuleID This is done to avoid odd test failures, like the one fixed in r171243. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171246 91177308-0d34-0410-b5e6-96231b3b80d8
* Set %defaultjit to use MCJIT for PowerPC targets.Ulrich Weigand2012-10-30
| | | | | | | | Update Transforms/LICM/2003-12-11-SinkingToPHI.ll test to use %defaultjit as well. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167031 91177308-0d34-0410-b5e6-96231b3b80d8
* LICM may hoist an instruction with undefined behavior above a trap.Nadav Rotem2012-09-04
| | | | | | | | | | | | Scan the body of the loop and find instructions that may trap. Use this information when deciding if it is safe to hoist or sink instructions. Notice that we can optimize the search of instructions that may throw in the case of nested loops. rdar://11518836 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163132 91177308-0d34-0410-b5e6-96231b3b80d8
* Avoid recomputing the unique exit blocks and their insert points when doingDan Gohman2012-08-08
| | | | | | | | | | multiple scalar promotions on a single loop. This also has the effect of preserving the order of stores sunk out of loops, which is aesthetically pleasing, and it happens to fix the testcase in PR13542, though it doesn't fix the underlying problem. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161459 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix the remaining TCL-style quotes found in the testsuite. This isChandler Carruth2012-07-02
| | | | | | | | | | | | | | | | | another mechanical change accomplished though the power of terrible Perl scripts. I have manually switched some "s to 's to make escaping simpler. While I started this to fix tests that aren't run in all configurations, the massive number of tests is due to a really frustrating fragility of our testing infrastructure: things like 'grep -v', 'not grep', and 'expected failures' can mask broken tests all too easily. Essentially, I'm deeply disturbed that I can change the testsuite so radically without causing any change in results for most platforms. =/ git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159547 91177308-0d34-0410-b5e6-96231b3b80d8
* Convert the uses of '|&' to use '2>&1 |' instead, which works on oldChandler Carruth2012-07-02
| | | | | | | | | | versions of Bash. In addition, I can back out the change to the lit built-in shell test runner to support this. This should fix the majority of fallout on Darwin, but I suspect there will be a few straggling issues. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159544 91177308-0d34-0410-b5e6-96231b3b80d8
* Convert all tests using TCL-style quoting to use shell-style quoting.Chandler Carruth2012-07-02
| | | | | | | | | | | | | | | | | | | | | | | | This was done through the aid of a terrible Perl creation. I will not paste any of the horrors here. Suffice to say, it require multiple staged rounds of replacements, state carried between, and a few nested-construct-parsing hacks that I'm not proud of. It happens, by luck, to be able to deal with all the TCL-quoting patterns in evidence in the LLVM test suite. If anyone is maintaining large out-of-tree test trees, feel free to poke me and I'll send you the steps I used to convert things, as well as answer any painful questions etc. IRC works best for this type of thing I find. Once converted, switch the LLVM lit config to use ShTests the same as Clang. In addition to being able to delete large amounts of Python code from 'lit', this will also simplify the entire test suite and some of lit's architecture. Finally, the test suite runs 33% faster on Linux now. ;] For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159525 91177308-0d34-0410-b5e6-96231b3b80d8
* An instruction in a loop is not guaranteed to be executed just because the loopNick Lewycky2012-05-01
| | | | | | | has no exit blocks. Fixes PR12706! git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155884 91177308-0d34-0410-b5e6-96231b3b80d8
* Replace all instances of dg.exp file with lit.local.cfg, since all tests are ↵Eli Bendersky2012-02-16
| | | | | | | | | | | run with LIT now and now Dejagnu. dg.exp is no longer needed. Patch reviewed by Daniel Dunbar. It will be followed by additional cleanup patches. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150664 91177308-0d34-0410-b5e6-96231b3b80d8
* Move Instruction::isSafeToSpeculativelyExecute out of VMCore andDan Gohman2011-12-14
| | | | | | | | | | into Analysis as a standalone function, since there's no need for it to be in VMCore. Also, update it to use isKnownNonZero and other goodies available in Analysis, making it more precise, enabling more aggressive optimization. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146610 91177308-0d34-0410-b5e6-96231b3b80d8
* Upgrade syntax of tests using volatile instructions to use 'load volatile' ↵Chris Lattner2011-11-27
| | | | | | instead of 'volatile load', which is archaic. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145171 91177308-0d34-0410-b5e6-96231b3b80d8
* LICM pass now understands invariant load metadata. Nothing generates this ↵Pete Cooper2011-11-08
| | | | | | yet so it will currently never get used in real tests git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144107 91177308-0d34-0410-b5e6-96231b3b80d8
* Atomic load/store support in LICM.Eli Friedman2011-08-15
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137648 91177308-0d34-0410-b5e6-96231b3b80d8
* Move "atomic" and "volatile" designations on instructions after the opcodeEli Friedman2011-08-12
| | | | | | | | | | | | of the instruction. Note that this change affects the existing non-atomic load and store instructions; the parser now accepts both forms, and the change is noted in the release notes. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@137527 91177308-0d34-0410-b5e6-96231b3b80d8
* Bring LICM into compliance with the new "Memory Model for Concurrent ↵Eli Friedman2011-07-20
| | | | | | Operations" in LangRef. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135625 91177308-0d34-0410-b5e6-96231b3b80d8
* LICM: Do not loose alignment on promotionTobias Grosser2011-07-06
| | | | | | | | The promotion code lost any alignment information, when hoisting loads and stores out of the loop. This lead to incorrect aligned memory accesses. We now use the largest alignment we can prove to be correct. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134520 91177308-0d34-0410-b5e6-96231b3b80d8
* manually upgrade a bunch of tests to modern syntax, and remove some thatChris Lattner2011-06-17
| | | | | | | | are either unreduced or only test old syntax. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133228 91177308-0d34-0410-b5e6-96231b3b80d8
* PR9604; try to deal with RAUW updates correctly in the AST. I'm not convincedEli Friedman2011-04-09
| | | | | | | | | it's completely safe to cache the AST across LICM runs even with this fix, but this fix can't hurt. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129198 91177308-0d34-0410-b5e6-96231b3b80d8
* Test for r129190.Eli Friedman2011-04-09
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129197 91177308-0d34-0410-b5e6-96231b3b80d8
* PR9634: Don't unconditionally tell the AliasSetTracker that the PreheaderLoadEli Friedman2011-04-07
| | | | | | | | | | | | | is equivalent to any other relevant value; it isn't true in general. If it is equivalent, the LoopPromoter will tell the AST the equivalence. Also, delete the PreheaderLoad if it is unused. Chris, since you were the last one to make major changes here, can you check that this is sane? git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129049 91177308-0d34-0410-b5e6-96231b3b80d8
* While sinking an instruction, do not lose llvm.dbg.value intrinsic.Devang Patel2011-03-08
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127214 91177308-0d34-0410-b5e6-96231b3b80d8
* Rename 'loopsimplify' to 'loop-simplify'.Cameron Zwarich2011-02-10
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125317 91177308-0d34-0410-b5e6-96231b3b80d8
* Enhance LICM to promote alias sets whose pointers themselves are stored,Chris Lattner2010-12-19
| | | | | | | which doesn't affect the memory address being promoted. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122172 91177308-0d34-0410-b5e6-96231b3b80d8
* fix PR8602, a bug in an assertion: a volatile store *of* a pointerChris Lattner2010-12-19
| | | | | | | | does not make the alias set for that pointer volatile, just stores *to* the pointer. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122171 91177308-0d34-0410-b5e6-96231b3b80d8
* Make BasicAliasAnalysis a normal AliasAnalysis implementation whichDan Gohman2010-10-18
| | | | | | | | | | | | | does normal initialization and normal chaining. Change the default AliasAnalysis implementation to NoAlias. Update StandardCompileOpts.h and friends to explicitly request BasicAliasAnalysis. Update tests to explicitly request -basicaa. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116720 91177308-0d34-0410-b5e6-96231b3b80d8
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-30 12:28:08 +0000