| Commit message (Collapse) | Author | Age |
|
|
|
|
|
|
| |
This will allow inlining get_magic, which should in turn fix one of the mingw
build problems after the switch to std::error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210712 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210687 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
| |
MSVC doesn't seem to provide any is_error_code_enum enumeration for the
windows errors.
Fortunately very few places in llvm have to handle raw windows errors, so
we can just construct the corresponding error_code directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210631 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210442 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210072 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
| |
There is no std::error_code::success, so this removes much of the noise
in transitioning to std::error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209952 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209951 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209102 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
| |
r207552, r207553 and r207554 all had bad test names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207560 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207554 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207553 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
| |
Move a detailed test of `BranchProbability::scale()` from
`BlockFrequencyTest` over to `BranchProbabilityTest`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207552 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change `BlockFrequency` to defer to `BranchProbability::scale()` and
`BranchProbability::scaleByInverse()`.
This removes `BlockFrequency::scale()` from its API (and drops the
ability to see the remainder), but the only user was the unit tests. If
some code in the future needs an API that exposes the remainder, we can
add something to `BranchProbability`, but I find that unlikely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207550 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
| |
Add API to `BranchProbability` for scaling big integers. Next job is to
rip the logic out of `BlockMass` and `BlockFrequency`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207544 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207540 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
| |
Based on review feedback from Dave on the original patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207146 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Boost's iterator_adaptor, and a specific adaptor which iterates over
pointees when wrapped around an iterator over pointers.
This is the result of a long discussion on IRC with Duncan Smith, Dave
Blaikie, Richard Smith, and myself. Essentially, I could use some subset
of the iterator facade facilities often used from Boost, and everyone
seemed interested in having the functionality in a reasonably generic
form. I've tried to strike a balance between the pragmatism and the
established Boost design. The primary differences are:
1) Delegating to the standard iterator interface names rather than
special names that then make up a second iterator-like API.
2) Using the name 'pointee_iterator' which seems more clear than
'indirect_iterator'. The whole business of calling the '*p' operation
'pointer indirection' in the standard is ... quite confusing. And
'dereference' is no better of a term for moving from a pointer to
a reference.
Hoping Duncan, and others continue to provide comments on this until
we've got a nice, minimal abstraction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207069 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206372 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
by removing the MallocSlabAllocator entirely and just using
MallocAllocator directly. This makes all off these allocators expose and
utilize the same core interface.
The only ugly part of this is that it exposes the fact that the JIT
allocator has no real handling of alignment, any more than the malloc
allocator does. =/ It would be nice to fix both of these to support
alignments, and then to leverage that in the BumpPtrAllocator to do less
over allocation in order to manually align pointers. But, that's another
patch for another day. This patch has no functional impact, it just
removes the somewhat meaningless wrapper around MallocAllocator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206267 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
|
|
| |
abstract interface. The only user of this functionality is the JIT
memory manager and it is quite happy to have a custom type here. This
removes a virtual function call and a lot of unnecessary abstraction
from the common case where this is just a *very* thin vaneer around
a call to malloc.
Hopefully still no functionality changed here. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206149 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
slabs rather than embedding a singly linked list in the slabs
themselves. This has a few advantages:
- Better utilization of the slab's memory by not wasting 16-bytes at the
front.
- Simpler allocation strategy by not having a struct packed at the
front.
- Avoids paging every allocated slab in just to traverse them for
deallocating or dumping stats.
The latter is the really nice part. Folks have complained from time to
time bitterly that tearing down a BumpPtrAllocator, even if it doesn't
run any destructors, pages in all of the memory allocated. Now it won't.
=]
Also resolves a FIXME with the scaling of the slab sizes. The scaling
now disregards specially sized slabs for allocations larger than the
threshold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206147 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
| |
Introduce ScalarTraits::mustQuote which determines whether or not a
StringRef needs quoting before it is acceptable to output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205955 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
| |
Don't quote octal compatible strings if they are only two wide, they
aren't ambiguous.
This reverts commit r205857 which reverted r205857.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205914 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
| |
This reverts commit r205839.
It broke several tests in lld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205857 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
| |
YAMLIO would turn a BinaryRef into the string 0000000004000000.
However, the leading zero causes parsers to interpret it as being an
octal number instead of a hexadecimal one.
Instead, escape such strings as needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205839 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
| |
MemoryBuffer
This is the other half of r205676.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205677 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
|
|
| |
MemoryBuffer
This avoids an extra copy during decompression and avoids the use of
MemoryBuffer which is a weirdly esoteric device that includes unrelated
concepts like "file name" (its rather generic name is a bit misleading).
Similar refactoring of zlib::compress coming up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205676 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
| |
parameters rather than runtime parameters.
There is only one user of these parameters and they are compile time for
that user. Making these compile time seems to better reflect their
intended usage as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205143 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
| |
more places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205141 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
| |
It is impossible to create a hard link to a non existing file, so create a
dummy file, create the link an delete the dummy file.
On windows one cannot remove the current directory, so chdir first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204719 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
| |
- create_link doesn't work for nonexistent file.
- remove cannot remove working directory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204579 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204533 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204426 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
| |
LockFileManager can handle a symbolic link that points nowhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204422 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
| |
Add a utility function to convert the Windows path separator to Unix style path
separators. This is used by a subsequent change in clang to enable the use of
Windows SDK headers on Linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203611 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
|
|
| |
Before this patch the unix code for creating hardlinks was unused. The code
for creating symbolic links was implemented in lib/Support/LockFileManager.cpp
and the code for creating hard links in lib/Support/*/Path.inc.
The only use we have for these is in LockFileManager.cpp and it can use both
soft and hard links. Just have a create_link function that creates one or the
other depending on the platform.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203596 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
| |
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203242 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
| |
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203083 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
| |
When using a //net/ path, we were transforming the trailing / into a '.'
when the path was just the root path and we were iterating backwards.
Forwards iteration and other kinds of root path (C:\, /) were already
correct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202999 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
| |
This will allow external callers of these functions to switch over time
rather than forcing a breaking change all a once. These particular
functions were determined by building clang/lld/lldb.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202959 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
| |
now. ;] Tested on both a static and shared CMake build. Hopefully the
bots will agree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202844 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
|
| |
source file had already been moved. Also move the unittest into the IR
unittest library.
This may seem an odd thing to put in the IR library but we only really
use this with instructions and it needs the LLVM context to work, so it
is intrinsically tied to the IR library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202842 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
| |
a bit surprising, as the class is almost entirely abstracted away from
any particular IR, however it encodes the comparsion predicates which
mutate ranges as ICmp predicate codes. This is reasonable as they're
used for both instructions and constants. Thus, it belongs in the IR
library with instructions and constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202838 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
|
|
| |
Move the test for this class into the IR unittests as well.
This uncovers that ValueMap too is in the IR library. Ironically, the
unittest for ValueMap is useless in the Support library (honestly, so
was the ValueHandle test) and so it already lives in the IR unittests.
Mmmm, tasty layering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202821 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202621 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
| |
directly, and remove the macro.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202612 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202587 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
| |
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202583 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
| |
-Wabsolute-value
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202286 91177308-0d34-0410-b5e6-96231b3b80d8
|
|
|
|
|
|
|
|
|
| |
After this I will set the default back to F_None. The advantage is that
before this patch forgetting to set F_Binary would corrupt a file on windows.
Forgetting to set F_Text produces one that cannot be read in notepad, which
is a better failure mode :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202052 91177308-0d34-0410-b5e6-96231b3b80d8
|