//=- X86SchedHaswell.td - X86 Haswell Scheduling -------------*- tablegen -*-=//
//
//                     The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file defines the machine model for Haswell to support instruction
// scheduling and other instruction cost heuristics.
//
//===----------------------------------------------------------------------===//

def HaswellModel : SchedMachineModel {
  // All x86 instructions are modeled as a single micro-op, and HW can decode 4
  // instructions per cycle.
  let IssueWidth = 4;
  let MicroOpBufferSize = 192; // Based on the reorder buffer.
  let LoadLatency = 4;
  let MispredictPenalty = 16;

  // FIXME: SSE4 and AVX are unimplemented. This flag is set to allow
  // the scheduler to assign a default model to unrecognized opcodes.
  let CompleteModel = 0;
}

let SchedModel = HaswellModel in {

// Haswell can issue micro-ops to 8 different ports in one cycle.

// Ports 0, 1, 5, and 6 handle all computation.
// Port 4 gets the data half of stores. Store data can be available later than
// the store address, but since we don't model the latency of stores, we can
// ignore that.
// Ports 2 and 3 are identical. They handle loads and the address half of
// stores. Port 7 can handle address calculations.
def HWPort0 : ProcResource<1>;
def HWPort1 : ProcResource<1>;
def HWPort2 : ProcResource<1>;
def HWPort3 : ProcResource<1>;
def HWPort4 : ProcResource<1>;
def HWPort5 : ProcResource<1>;
def HWPort6 : ProcResource<1>;
def HWPort7 : ProcResource<1>;

// Many micro-ops are capable of issuing on multiple ports.
def HWPort23  : ProcResGroup<[HWPort2, HWPort3]>;
def HWPort237 : ProcResGroup<[HWPort2, HWPort3, HWPort7]>;
def HWPort05  : ProcResGroup<[HWPort0, HWPort5]>;
def HWPort06 : ProcResGroup<[HWPort0, HWPort6]>;
def HWPort15  : ProcResGroup<[HWPort1, HWPort5]>;
def HWPort015 : ProcResGroup<[HWPort0, HWPort1, HWPort5]>;
def HWPort0156: ProcResGroup<[HWPort0, HWPort1, HWPort5, HWPort6]>;

// 60 Entry Unified Scheduler
def HWPortAny : ProcResGroup<[HWPort0, HWPort1, HWPort2, HWPort3, HWPort4,
                              HWPort5, HWPort6, HWPort7]> {
  let BufferSize=60;
}

// Integer division issued on port 0.
def HWDivider : ProcResource<1>;

// Loads are 4 cycles, so ReadAfterLd registers needn't be available until 4
// cycles after the memory operand.
def : ReadAdvance<ReadAfterLd, 4>;

// Many SchedWrites are defined in pairs with and without a folded load.
// Instructions with folded loads are usually micro-fused, so they only appear
// as two micro-ops when queued in the reservation station.
// This multiclass defines the resource usage for variants with and without
// folded loads.
multiclass HWWriteResPair<X86FoldableSchedWrite SchedRW,
                          ProcResourceKind ExePort,
                          int Lat> {
  // Register variant is using a single cycle on ExePort.
  def : WriteRes<SchedRW, [ExePort]> { let Latency = Lat; }

  // Memory variant also uses a cycle on port 2/3 and adds 4 cycles to the
  // latency.
  def : WriteRes<SchedRW.Folded, [HWPort23, ExePort]> {
     let Latency = !add(Lat, 4);
  }
}

// A folded store needs a cycle on port 4 for the store data, but it does not
// need an extra port 2/3 cycle to recompute the address.
def : WriteRes<WriteRMW, [HWPort4]>;

// Store_addr on 237.
// Store_data on 4.
def : WriteRes<WriteStore, [HWPort237, HWPort4]>;
def : WriteRes<WriteLoad,  [HWPort23]> { let Latency = 4; }
def : WriteRes<WriteMove,  [HWPort0156]>;
def : WriteRes<WriteZero,  []>;

defm : HWWriteResPair<WriteALU,   HWPort0156, 1>;
defm : HWWriteResPair<WriteIMul,  HWPort1,   3>;
def  : WriteRes<WriteIMulH, []> { let Latency = 3; }
defm : HWWriteResPair<WriteShift, HWPort06,  1>;
defm : HWWriteResPair<WriteJump,  HWPort06,   1>;

// This is for simple LEAs with one or two input operands.
// The complex ones can only execute on port 1, and they require two cycles on
// the port to read all inputs. We don't model that.
def : WriteRes<WriteLEA, [HWPort15]>;

// This is quite rough, latency depends on the dividend.
def : WriteRes<WriteIDiv, [HWPort0, HWDivider]> {
  let Latency = 25;
  let ResourceCycles = [1, 10];
}
def : WriteRes<WriteIDivLd, [HWPort23, HWPort0, HWDivider]> {
  let Latency = 29;
  let ResourceCycles = [1, 1, 10];
}

// Scalar and vector floating point.
defm : HWWriteResPair<WriteFAdd,   HWPort1, 3>;
defm : HWWriteResPair<WriteFMul,   HWPort0, 5>;
defm : HWWriteResPair<WriteFDiv,   HWPort0, 12>; // 10-14 cycles.
defm : HWWriteResPair<WriteFRcp,   HWPort0, 5>;
defm : HWWriteResPair<WriteFSqrt,  HWPort0, 15>;
defm : HWWriteResPair<WriteCvtF2I, HWPort1, 3>;
defm : HWWriteResPair<WriteCvtI2F, HWPort1, 4>;
defm : HWWriteResPair<WriteCvtF2F, HWPort1, 3>;

// Vector integer operations.
defm : HWWriteResPair<WriteVecShift, HWPort0,  1>;
defm : HWWriteResPair<WriteVecLogic, HWPort015, 1>;
defm : HWWriteResPair<WriteVecALU,   HWPort15,  1>;
defm : HWWriteResPair<WriteVecIMul,  HWPort0,   5>;
defm : HWWriteResPair<WriteShuffle,  HWPort5,  1>;

def : WriteRes<WriteSystem,     [HWPort0156]> { let Latency = 100; }
def : WriteRes<WriteMicrocoded, [HWPort0156]> { let Latency = 100; }
} // SchedModel