Move /etc/conf.d/rc to /etc/rc.conf.

Lowercase all configurable variables, non configurations remain uppercase.
Replace rc_env_bool with rc_yesno.
Split localmount info procfs (Linux) and dumpon, savecore (BSD)

11 files changed, 183 insertions, 72 deletions

diff --git a/init.d.BSD/clock b/init.d.BSD/clock
index 99e9273..3bb51b7 100755
--- a/init.d.BSD/clock
+++ b/init.d.BSD/clock
@@ -29,19 +29,24 @@ extra_commands="save"
 description="Sets the local clock to UTC or Local Time." 
 description_save="Saves the current time in the BIOS."
 
+clock=${clock:-${CLOCK:-UTC}}
+if [ "${clock}" = "UTC" ]; then
+	utc="UTC"
+else
+	utc="Local Time"
+fi
+
 depend() {
 	# BSD adjkerntz needs to be able to write to /etc
-	if [ "${CLOCK}" = "UTC" -a -e /etc/wall_cmos_clock ] ||
-	   [ "${CLOCK}" != "UTC" -a ! -e /etc/wall_cmos_clock ] ; then
+	if [ "${clock}" = "UTC" -a -e /etc/wall_cmos_clock ] ||
+	   [ "${clock}" != "UTC" -a ! -e /etc/wall_cmos_clock ]; then
 		need checkroot
 	fi
 }
 
 start() {
-	local TBLURB="Local Time"
-	[ "${CLOCK}" = "UTC" ] && TBLURB="UTC"
-	ebegin "Starting the System Clock Adjuster [${TBLURB}]"
-	if [ "${CLOCK}" != "UTC" ] ; then
+	ebegin "Starting the System Clock Adjuster [${utc}]"
+	if [ "${clock}" != "UTC" ]; then
 		echo >/etc/wall_cmos_clock
 		start-stop-daemon --start --exec /sbin/adjkerntz -- -i
 	else
@@ -52,16 +57,16 @@ start() {
 }
 
 save() {
-	local TBLURB="Local Time"
-	[ "${CLOCK}" = "UTC" ] && TBLURB="UTC"
-	ebegin "Setting hardware clock using the system clock" "[${TBLURB}]"
+	ebegin "Setting hardware clock using the system clock [${utc}]"
 	adjkerntz -a
 	eend $?
 }
 
 stop() {
     # Don't tweak the hardware clock on LiveCD halt.
-	[ -z "${CDBOOT}" -a "${CLOCK_SYSTOHC}" = "yes" ] && save 
+	if yesno "${clock_systohc:-${CLOCK_SYSTOHC}}"; then
+	   [ -z "${CDBOOT}" ] && save
+	fi
 
 	ebegin "Stopping the System Clock Adjuster"
 	if start-stop-daemon --test --quiet --stop --exec /sbin/adjkerntz ; then
diff --git a/init.d.BSD/dumpon b/init.d.BSD/dumpon
new file mode 100755
index 0000000..1faf23b
--- /dev/null
+++ b/init.d.BSD/dumpon
@@ -0,0 +1,47 @@
+#!/sbin/runscript
+# Copyright 1999-2007 Gentoo Foundation
+# Copyright 2007 Roy Marples
+# All rights reserved
+
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+
+description="Configures a specific kernel dump device."
+
+depend() {
+	need swap
+	before savecore
+}
+
+start() {
+	# Setup any user requested dump device
+	if [ -n "${dump_device}" ] ; then
+		ebegin "Activating kernel core dump device (${dump_device})"
+		dumpon ${dump_device}
+		eend $?
+	fi
+}
+
+stop() {
+	ebegin "Deactiving kernel core dump device"
+	dumpon off
+	eend $?
+}
diff --git a/init.d.BSD/ipfw b/init.d.BSD/ipfw
index f5dfa77..cdddfae 100644
--- a/init.d.BSD/ipfw
+++ b/init.d.BSD/ipfw
@@ -25,9 +25,9 @@
 
 # This is based on /etc/rc.firewall and /etc/rc.firewall6 from FreeBSD
 
-IP_IN=${IP_IN-any}
-PORTS_IN=${PORTS_IN-auth ssh}
-PORTS_NOLOG=${PORTS_NOLOG-135-139,445 1026,1027 1433,1434}
+ipfw_ip_in=${ipfw_ip_in-any}
+ipfw_ports_in=${ipfw_ports_in-auth ssh}
+ipfw_ports_nolog=${ipfw_ports_nolog-135-139,445 1026,1027 1433,1434}
 
 opts="panic showstatus"
 
@@ -105,8 +105,8 @@ start() {
 	
 	# Add permits for this workstations published services below
 	# Only IPs and nets in firewall_allowservices is allowed in.
-	for i in ${IP_IN}; do
-		for p in ${PORTS_IN}; do
+	for i in ${ipfw_ip_in}; do
+		for p in ${ipfw_ports_in}; do
 	    	ipfw add pass tcp from ${i} to me ${p}
 		done
 	done
@@ -114,14 +114,14 @@ start() {
 	# Allow all connections from trusted IPs.
 	# Playing with the content of firewall_trusted could seriously
 	# degrade the level of protection provided by the firewall.
-	for i in ${IP_TRUST}; do
+	for i in ${ipfw_ip_trust}; do
 		ipfw add pass ip from ${i} to me
 	done
 	
 	ipfw add 65000 count ip from any to any
 
 	# Drop packets to ports where we don't want logging
-	for p in ${PORTS_NOLOG}; do
+	for p in ${ipfw_ports_nolog}; do
 		ipfw add deny { tcp or udp } from any to any ${p} in
 	done
 
@@ -138,7 +138,7 @@ start() {
 	ipfw add deny tcp from any 80,443 to any 1024-65535 in
 
 	# Deny and (if wanted) log the rest unconditionally.
-	if [ "${LOG_DENY}" = "yes" ]; then
+	if yesno ${ipfw_log_deny:-no}; then
 		log="log"
 		sysctl net.inet.ip.fw.verbose=1 >/dev/null
 	fi
diff --git a/init.d.BSD/moused b/init.d.BSD/moused
index 2fb3626..70b0f0c 100644
--- a/init.d.BSD/moused
+++ b/init.d.BSD/moused
@@ -23,14 +23,15 @@
 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 # SUCH DAMAGE.
 
-name=${SVCNAME##*.}
-if [ -n "${name}" -a "${name}" != "moused" ] ; then
-	device=/dev/"${name}"
-	pidfile=/var/run/moused-"${name}".pid
+mouse=${SVCNAME##*.}
+if [ -n "${name}" -a "${mouse}" != "moused" ] ; then
+	moused_device=/dev/"${mouse}"
+	pidfile=/var/run/moused-"${mouse}".pid
 else
-	name=
 	pidfile=/var/run/moused.pid
 fi
+name="Console Mouse Daemon"
+[ -n "${moused_device}" ] && name="${name} (${moused_device})"
 
 depend() {
 	need localmount
@@ -38,45 +39,38 @@ depend() {
 }
 
 start() {
-	ebegin "Starting the Console Mouse Daemon" "${name}"
+	ebegin "Starting ${name}" 
 
-	if [ -z "${device}" ] ; then
+	if [ -z "${moused_device}" ] ; then
 		local dev=
 		for dev in /dev/psm[0-9]* /dev/ums[0-9]* ; do
 			[ -e "${dev}" ] || continue
 			[ -e /var/run/moused-$(basename "${dev}").pid ] && continue 
-			device=${dev}
+			moused_device=${dev}
 			eindent
-			einfo "Using mouse on ${device}"
+			einfo "Using mouse on ${moused_device}"
 			eoutdent
 			break
 		done
 	fi
 
-	if [ -z "${device}" ] ; then
+	if [ -z "${moused_device}" ] ; then
 		eend 1 "No mouse device found" 
 		return 1
 	fi
 
 	start-stop-daemon --start --exec /usr/sbin/moused \
 		--pidfile "${pidfile}" \
-		-- ${MOUSED_ARGS} -p "${device}" -I "${pidfile}"
+		-- ${moused_args} -p "${moused_device}" -I "${pidfile}"
 	local retval=$?
 	
-	[ -n "${MOUSE_CHAR_START}" ] && MOUSE_CHAR_START="-M ${MOUSE_CHAR_START}"
 	local ttyv=
 	for ttyv in /dev/ttyv*; do
-		vidcontrol < "${ttyv}" ${MOUSE_CHAR_START} -m on
+		vidcontrol < "${ttyv}" -m on
 		: $((retval+= $?))
 	done
 	
 	eend ${retval} "Failed to start moused"
 }
 
-stop() {
-	ebegin "Stopping the Console Mouse Daemon ${name}"
-	start-stop-daemon --quiet --stop --pidfile "${pidfile}"
-	eend $? "Failed to stop moused"
-}
-
 # vim: set ts=4 :
diff --git a/init.d.BSD/powerd b/init.d.BSD/powerd
index a97e2e0..c788694 100644
--- a/init.d.BSD/powerd
+++ b/init.d.BSD/powerd
@@ -25,7 +25,7 @@
 # SUCH DAMAGE.
 
 command=/usr/sbin/powerd
-command_args=${POWERD_ARGS}
+command_args=${powerd_args}
 pidfile=/var/run/powerd.pid
 name="Power Control Daemon"
 
@@ -36,10 +36,19 @@ depend() {
 }
 
 start_pre() {
-	if [ -n "${BATTERY_MODE}" ]; then
-		command_args="${command_args} -b ${BATTERY_MODE}"
+	if [ -n "${powerd_battery_mode}" ]; then
+		command_args="${command_args} -b ${powerd_battery_mode}"
 	fi
-	if [ -n "${AC_MODE}" ]; then
-		command_args="${command_args} -a ${AC_MODE}"
+	if [ -n "${powerd_ac_mode}" ]; then
+		command_args="${command_args} -a ${powerd_ac_mode}"
+	fi
+}
+
+stop_post()
+{
+	local level=$(sysctl -n dev.cpu.0.freq_levels |
+	    sed -e 's:/.*::')
+	if [ -n "${level}" ]; then
+		sysctl dev.cpu.0.freq="${level}" >/dev/null
 	fi
 }
diff --git a/init.d.BSD/rarpd b/init.d.BSD/rarpd
index e054d56..16ed6de 100644
--- a/init.d.BSD/rarpd
+++ b/init.d.BSD/rarpd
@@ -25,14 +25,15 @@
 # SUCH DAMAGE.
 
 command=/usr/sbin/rarpd
-command_args="-f ${RARPD_ARGS}"
+command_args="-f ${rarpd_args}"
 pidfile=/var/run/rarpd.pid
 name="Reverse ARP Daemon"
+required_files="/etc/ethers"
 
-if [ -z "${RARPD_INTERFACE}" ]; then
+if [ -z "${rarpd_interface}" ]; then
 	command_args="${command_args} -a"
 else
-	command_args="${command_args} ${RARPD_INTERFACE}"
+	command_args="${command_args} ${rarpd_interface}"
 fi
 command_background="YES"
 
@@ -40,9 +41,9 @@ depend() {
 	need localmount
 	after bootmisc
 
-	if [ -z "${RARPD_INTERFACE}" ]; then
+	if [ -z "${rarpd_interface}" ]; then
 		need net
 	else
-		net net."${RARPD_INTERFACE}"
+		net net."${rarpd_interface}"
 	fi
 }
diff --git a/init.d.BSD/rc-enabled b/init.d.BSD/rc-enabled
index 9ab95d5..a43680c 100644
--- a/init.d.BSD/rc-enabled
+++ b/init.d.BSD/rc-enabled
@@ -25,7 +25,8 @@
 
 depend() {
 	need localmount net
-	after $(ls -1 | grep -v local | xargs)
+	after *
+	before local
 }
 
 start() {
diff --git a/init.d.BSD/rpcbind b/init.d.BSD/rpcbind
index 403d095..8a5299a 100644
--- a/init.d.BSD/rpcbind
+++ b/init.d.BSD/rpcbind
@@ -25,7 +25,7 @@
 # SUCH DAMAGE.
 
 command=/usr/sbin/rpcbind
-command_args=${RPCBIND_ARGS}
+command_args=${rpcbind_args}
 name="RPC program number mapper"
 
 depend() {
diff --git a/init.d.BSD/savecore b/init.d.BSD/savecore
new file mode 100755
index 0000000..8d8577f
--- /dev/null
+++ b/init.d.BSD/savecore
@@ -0,0 +1,56 @@
+#!/sbin/runscript
+# Copyright 1999-2007 Gentoo Foundation
+# Copyright 2007 Roy Marples
+# All rights reserved
+
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+# SUCH DAMAGE.
+
+description="Saves a kernel dump."
+
+depend() {
+	need checkfs
+	before swap
+}
+
+start() {
+	local dump_dir=${dump_dir:-/var/crash}
+	if ! [ -d "${dump_dir}" ]; then
+		mkdir -p "${dump_dir}"
+		chmod 700 "${dump_dir}"
+	fi
+
+	if [ "${RC_UNAME}" = "FreeBSD" ] ; then
+		# Don't quote ${dump_device}, so that if it's unset,
+		# savecore will check on the partitions listed in fstab
+		# without errors in the output
+		savecore -C "${dump_dir}" ${dump_device} >/dev/null
+	else
+		ls "${dump_dir}"/bsd* > /dev/null 2>&1
+	fi
+	[ $? = 0 ] || return 0
+
+	local sopts="${dump_dir} ${dump_device}"
+	yesno ${dump_compress} && sopts="-z ${sopts}"
+	ebegin "Saving kernel core dump in ${dump_dir}"
+	savecore ${sopts} >/dev/null
+	eend $?
+}
diff --git a/init.d.BSD/syscons b/init.d.BSD/syscons
index 5fc0e7c..ae174f3 100644
--- a/init.d.BSD/syscons
+++ b/init.d.BSD/syscons
@@ -28,30 +28,29 @@ depend() {
 }
 
 start() {
-	if [ -n "${MODE}" ]; then
-		ebegin "Setting mode to ${MODE} for all screens"
+	if [ -n "${allscreen_flags}" ]; then
+		ebegin "Setting mode to ${allscreen_flags} for all screens"
 		for v in /dev/ttyv*; do
-			[ -c "${v}" ] || continue
-			vidcontrol "${MODE}" <"${v}"
+			vidcontrol ${allscreen_flags} <"${v}"
 		done
 		eend $?
 	fi
 	
-	if [ -n "${KEYMAP}" ]; then
-		ebegin "Setting keymap to ${KEYMAP}"
-		kbdcontrol -l ${KEYMAP} </dev/console
+	if [ -n "${keymap}" ]; then
+		ebegin "Setting keymap to ${keymap}"
+		kbdcontrol -l ${keymap} </dev/console
 		eend $?
 	fi
 	
-	if [ -n "${KEYRATE}" ]; then
-		ebegin "Setting keyrate to ${KEYRATE}"
-		kbdcontrol -r ${KEYRATE} </dev/console
+	if [ -n "${keyrate}" ]; then
+		ebegin "Setting keyrate to ${keyrate}"
+		kbdcontrol -r ${keyrate} </dev/console
 		eend $?
 	fi
 
-	if [ -n "${KEYCHANGE}" ]; then
+	if [ -n "${keychange}" ]; then
 		ebegin "Changing function keys"
-		eval set -- "${KEYCHANGE}"
+		eval set -- "${keychange}"
 		eindent
 		while [ $# -gt 0 ] ; do
 			veinfo "F$1 -> \`$2'"
@@ -62,14 +61,14 @@ start() {
 		eoutdent
 	fi
 	
-	if [ -n "${CURSOR}" ]; then
+	if [ -n "${cursor}" ]; then
 		ebegin "Setting cursor"
-		vidcontrol -c ${CURSOR}
+		vidcontrol -c ${cursor}
 		eend $?
 	fi
 
 	local v= f=
-	for v in FONT8x16 FONT8x14 FONT8x8; do
+	for v in font8x16 font8x14 font8x8; do
 		f=$(eval \$"${v}")
 		if [ -n "${f}" ]; then
 			ebegin "Setting font ${f}"
@@ -78,25 +77,24 @@ start() {
 		fi
 	done
 
-	if [ -n "${BLANKTIME}" ]; then
+	if [ -n "${blanktime}" ]; then
 		ebegin "Setting blanktime"
-		vidcontrol -t ${BLANKTIME}
+		vidcontrol -t ${blanktime}
 		eend $?
 	fi
 
-	if [ -n "${SAVER}" ]; then
+	if [ -n "${saver}" ]; then
 		local i=
 		for i in $(kldstat | sed -n -e 's/.* \(splash_.*\)/\1/p'); do
 			kldunload "${i}"
 		done
-		kldstat -v | grep -q _saver || kldload ${SAVER}_saver
+		kldstat -v | grep -q _saver || kldload ${saver}_saver
 	fi
 
-	if [ -n "${KBDFLAGS}" ]; then
+	if [ -n "${kbdflags}" ]; then
 		ebegin "Setting keyboard flags for all screens"
 		for v in /dev/ttyv*; do
-			[ -c "${v}" ] || continue
-			kbdcontrol ${KBDFLAGS} <"${v}"
+			kbdcontrol ${kbdflags} <${v}
 		done
 		eend $?
 	fi
diff --git a/init.d.BSD/syslogd b/init.d.BSD/syslogd
index c0e57e1..d9a131a 100644
--- a/init.d.BSD/syslogd
+++ b/init.d.BSD/syslogd
@@ -25,7 +25,7 @@
 # SUCH DAMAGE.
 
 command=/usr/sbin/syslogd
-command_args=${SYSLOGD_ARGS}
+command_args=${syslogd_args}
 pidfile=/var/run/syslog.pid
 name="System Logger Daemon"