From f51d8d0b7d8ee124b09445826059f20a7f3951be Mon Sep 17 00:00:00 2001 From: Roy Marples Date: Sat, 25 Apr 2009 13:44:41 +0000 Subject: Document interfaces variable useage a bit better. --- conf.d/network.Linux | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) (limited to 'conf.d/network.Linux') diff --git a/conf.d/network.Linux b/conf.d/network.Linux index 395c1cc..3c230fe 100644 --- a/conf.d/network.Linux +++ b/conf.d/network.Linux @@ -1,27 +1,27 @@ # ifconfig under Linux is not that powerful and doesn't easily handle # multiple addresses # On the other hand, ip (iproute2) is quite powerful and is also supported -# ip_eth0="192.168.0.10/24; 192.168.10.10/24" +#ip_eth0="192.168.0.10/24; 192.168.10.10/24" # Create a bonded interface -# interfaces="bond0" -# ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0" -# ifconfig_bond0="192.168.0.10 netmask 255.255.255.0" -# ifdown_bond0="rmmod bonding" +#interfaces="bond0" +#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0" +#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0" +#ifdown_bond0="rmmod bonding" # Create a bridged interface - let dhcpcd configure the address -# interfaces="br0" -# ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2" -# ifdown_br0="ifconfig \$int down; btctl delbr \$int" +#interfaces="br0" +#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2" +#ifdown_br0="ifconfig \$int down; btctl delbr \$int" # Create VLAN -# interfaces="eth0_2 eth0_3 eth0_4" -# ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4" -# ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0" -# ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0" -# ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0" -# ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4" +#interfaces="eth0_2 eth0_3 eth0_4" +#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4" +#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0" +#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0" +#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0" +#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4" # Normally you would use wpa_supplicant to configure wireless, but you can # use iwconfig also -# ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar" +#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar" -- cgit v1.2.3