From 5af58b45146ab5253ca964738f4e45287bf963d4 Mon Sep 17 00:00:00 2001
From: Roy Marples <roy@marples.name>
Date: Thu, 5 Apr 2007 11:18:42 +0000
Subject: Rewrite the core parts in C. We now provide librc so other programs
 can query runlevels, services and state without using bash. We also provide
 libeinfo so other programs can easily use our informational functions.

As such, we have dropped the requirement of using bash as the init script
shell. We now use /bin/sh and have strived to make the scripts as portable
as possible. Shells that work are bash and dash. busybox works provided
you disable s-s-d. If you have WIPE_TMP set to yes in conf.d/bootmisc you
should disable find too.
zsh and ksh do not work at this time.

Networking support is currently being re-vamped also as it was heavily bash
array based. As such, a new config format is available like so
config_eth0="1.2.3.4/24 5.6.7.8/16"
or like so
config_eth0="'1.2.3.4 netmask 255.255.255.0' '5.6.7.8 netmask 255.255.0.0'"

We will still support the old bash array format provided that /bin/sh IS
a link it bash.

ChangeLog for baselayout-1 can be found in our SVN repo.
---
 net.Linux/vlan.sh | 108 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 108 insertions(+)
 create mode 100644 net.Linux/vlan.sh

(limited to 'net.Linux/vlan.sh')

diff --git a/net.Linux/vlan.sh b/net.Linux/vlan.sh
new file mode 100644
index 0000000..fef4f2c
--- /dev/null
+++ b/net.Linux/vlan.sh
@@ -0,0 +1,108 @@
+# Copyright 2004-2007 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+
+vlan_depend() {
+	program /sbin/vconfig
+	after interface
+	before dhcp
+}
+
+_config_vars="$_config_vars vlans"
+
+_is_vlan() {
+	[ ! -d /proc/net/vlan ] && return 1
+	grep -q "^${IFACE}[[:space:]]+" /proc/net/vlan/config
+}
+
+_get_vlans() {
+	[ -e /proc/net/vlan/config ] || return 1
+	sed -n -e 's/^\(.*[0-9]\) \(.* \) .*'"${IFACE}"'$/\1/p' /proc/net/vlan/config
+}
+
+_check_vlan() {
+	if [ ! -d /proc/net/vlan ] ; then
+		modprobe 8021q
+		if [ ! -d /proc/net/vlan ] ; then
+			eerror "VLAN (802.1q) support is not present in this kernel"
+			return 1
+		fi
+	fi
+}
+
+vlan_pre_start() {
+	eval $(_get_array "vconfig_${IFVAR}")
+	[ $# = "0" ] && return 0
+
+	_check_vlan || return 1
+	_exists || return 1
+
+	local v= x= e=
+	for v in "$@" ; do
+		case "${v}" in
+			set_name_type" "*) x=${v} ;;
+			*) x="$(echo "${v}" | sed -e "s/ / ${IFACE} /g")"
+			   [ "${x}" = "${v}" ] && x="${x} ${IFACE}"
+			   ;;
+		esac
+
+		set -x
+		e="$(vconfig ${x} 2>&1 1>/dev/null)"
+		set +x
+		[ -z "${e}" ] && continue
+		eerror "${e}"
+		return 1
+	done
+}
+
+vlan_post_start() {
+	eval $(_get_array "vlans_${IFVAR}")
+	[ $# = "0" ] && return 0
+	
+	_check_vlan || return 1
+	_exists || return 1
+
+	local vlan= e= s=
+	for vlan in "$@" ; do
+		einfo "Adding VLAN ${vlan} to ${IFACE}"
+		e="$(vconfig add "${IFACE}" "${vlan}" 2>&1 1>/dev/null)"
+		if [ -n "${e}" ] ; then
+			eend 1 "${e}"
+			continue
+		fi
+
+		# We may not want to start the vlan ourselves
+		eval s=\$vlan_start_${IFVAR}
+		[ "${s:-yes}" != "yes" ] && continue
+
+		# We need to work out the interface name of our new vlan id
+		local ifname="$( \
+			sed -n -e 's/^\([^ \t]*\) *| '"${vlan}"' *| .*'"${iface}"'$/\1/p' \
+			/proc/net/vlan/config )"
+		mark_service_started "net.${ifname}"
+		(
+			export SVCNAME="net.${ifname}"
+			start	
+		) || mark_service_stopped "net.${ifname}"
+	done
+	
+	return 0
+}
+
+vlan_post_stop() {
+	local vlan=
+
+	for vlan in $(_get_vlans) ; do
+		einfo "Removing VLAN ${vlan##*.} from ${IFACE}"
+		(
+			export SVCNAME="net.${vlan}"
+			stop
+		) && {
+			mark_service_stopped "net.${vlan}"
+			vconfig rem "${vlan}" >/dev/null
+		}
+	done
+
+	return 0
+}
+
+# vim: set ts=4 :
-- 
cgit v1.2.3