Add support for the VIA PadLock instructions.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128826 91177308-0d34-0410-b5e6-96231b3b80d8

7 files changed, 81 insertions, 4 deletions

diff --git a/lib/Target/X86/Disassembler/X86DisassemblerDecoder.c b/lib/Target/X86/Disassembler/X86DisassemblerDecoder.c
index 06300a6868..de1610ba3d 100644
--- a/lib/Target/X86/Disassembler/X86DisassemblerDecoder.c
+++ b/lib/Target/X86/Disassembler/X86DisassemblerDecoder.c
@@ -75,6 +75,12 @@ static int modRMRequired(OpcodeType type,
   case THREEBYTE_3A:
     decision = &THREEBYTE3A_SYM;
     break;
+  case THREEBYTE_A6:
+    decision = &THREEBYTEA6_SYM;
+    break;
+  case THREEBYTE_A7:
+    decision = &THREEBYTEA7_SYM;
+    break;
   }
   
   return decision->opcodeDecisions[insnContext].modRMDecisions[opcode].
@@ -115,6 +121,12 @@ static InstrUID decode(OpcodeType type,
   case THREEBYTE_3A:
     dec = &THREEBYTE3A_SYM.opcodeDecisions[insnContext].modRMDecisions[opcode];
     break;
+  case THREEBYTE_A6:
+    dec = &THREEBYTEA6_SYM.opcodeDecisions[insnContext].modRMDecisions[opcode];
+    break;
+  case THREEBYTE_A7:
+    dec = &THREEBYTEA7_SYM.opcodeDecisions[insnContext].modRMDecisions[opcode];
+    break;
   }
   
   switch (dec->modrm_type) {
@@ -580,6 +592,24 @@ static int readOpcode(struct InternalInstruction* insn) {
         return -1;
       
       insn->opcodeType = THREEBYTE_3A;
+    } else if (current == 0xa6) {
+      dbgprintf(insn, "Found a three-byte escape prefix (0x%hhx)", current);
+      
+      insn->threeByteEscape = current;
+      
+      if (consumeByte(insn, &current))
+        return -1;
+      
+      insn->opcodeType = THREEBYTE_A6;
+    } else if (current == 0xa7) {
+      dbgprintf(insn, "Found a three-byte escape prefix (0x%hhx)", current);
+      
+      insn->threeByteEscape = current;
+      
+      if (consumeByte(insn, &current))
+        return -1;
+      
+      insn->opcodeType = THREEBYTE_A7;
     } else {
       dbgprintf(insn, "Didn't find a three-byte escape prefix");
       
diff --git a/lib/Target/X86/Disassembler/X86DisassemblerDecoderCommon.h b/lib/Target/X86/Disassembler/X86DisassemblerDecoderCommon.h
index bc35be80c8..70315ed572 100644
--- a/lib/Target/X86/Disassembler/X86DisassemblerDecoderCommon.h
+++ b/lib/Target/X86/Disassembler/X86DisassemblerDecoderCommon.h
@@ -30,6 +30,8 @@
 #define TWOBYTE_SYM       x86DisassemblerTwoByteOpcodes
 #define THREEBYTE38_SYM   x86DisassemblerThreeByte38Opcodes
 #define THREEBYTE3A_SYM   x86DisassemblerThreeByte3AOpcodes
+#define THREEBYTEA6_SYM   x86DisassemblerThreeByteA6Opcodes
+#define THREEBYTEA7_SYM   x86DisassemblerThreeByteA7Opcodes
 
 #define INSTRUCTIONS_STR  "x86DisassemblerInstrSpecifiers"
 #define CONTEXTS_STR      "x86DisassemblerContexts"
@@ -37,6 +39,8 @@
 #define TWOBYTE_STR       "x86DisassemblerTwoByteOpcodes"
 #define THREEBYTE38_STR   "x86DisassemblerThreeByte38Opcodes"
 #define THREEBYTE3A_STR   "x86DisassemblerThreeByte3AOpcodes"
+#define THREEBYTEA6_STR   "x86DisassemblerThreeByteA6Opcodes"
+#define THREEBYTEA7_STR   "x86DisassemblerThreeByteA7Opcodes"
 
 /*
  * Attributes of an instruction that must be known before the opcode can be
@@ -119,7 +123,9 @@ typedef enum {
   ONEBYTE       = 0,
   TWOBYTE       = 1,
   THREEBYTE_38  = 2,
-  THREEBYTE_3A  = 3
+  THREEBYTE_3A  = 3,
+  THREEBYTE_A6  = 4,
+  THREEBYTE_A7  = 5
 } OpcodeType;
 
 /*
diff --git a/lib/Target/X86/X86CodeEmitter.cpp b/lib/Target/X86/X86CodeEmitter.cpp
index 60d9d4ad06..421e221d20 100644
--- a/lib/Target/X86/X86CodeEmitter.cpp
+++ b/lib/Target/X86/X86CodeEmitter.cpp
@@ -652,6 +652,8 @@ void Emitter<CodeEmitter>::emitInstruction(MachineInstr &MI,
   case X86II::TB:  // Two-byte opcode prefix
   case X86II::T8:  // 0F 38
   case X86II::TA:  // 0F 3A
+  case X86II::A6:  // 0F A6
+  case X86II::A7:  // 0F A7
     Need0FPrefix = true;
     break;
   case X86II::TF: // F2 0F 38
@@ -695,6 +697,12 @@ void Emitter<CodeEmitter>::emitInstruction(MachineInstr &MI,
   case X86II::TA:    // 0F 3A
     MCE.emitByte(0x3A);
     break;
+  case X86II::A6:    // 0F A6
+    MCE.emitByte(0xA6);
+    break;
+  case X86II::A7:    // 0F A7
+    MCE.emitByte(0xA7);
+    break;
   }
 
   // If this is a two-address instruction, skip one of the register operands.
diff --git a/lib/Target/X86/X86InstrFormats.td b/lib/Target/X86/X86InstrFormats.td
index cafe37b099..7daa264922 100644
--- a/lib/Target/X86/X86InstrFormats.td
+++ b/lib/Target/X86/X86InstrFormats.td
@@ -105,7 +105,9 @@ class XD     { bits<5> Prefix = 11; }
 class XS     { bits<5> Prefix = 12; }
 class T8     { bits<5> Prefix = 13; }
 class TA     { bits<5> Prefix = 14; }
-class TF     { bits<5> Prefix = 15; }
+class A6     { bits<5> Prefix = 15; }
+class A7     { bits<5> Prefix = 16; }
+class TF     { bits<5> Prefix = 17; }
 class VEX    { bit hasVEXPrefix = 1; }
 class VEX_W  { bit hasVEX_WPrefix = 1; }
 class VEX_4V : VEX { bit hasVEX_4VPrefix = 1; }
diff --git a/lib/Target/X86/X86InstrInfo.h b/lib/Target/X86/X86InstrInfo.h
index 6c0aa594c2..39448cabb4 100644
--- a/lib/Target/X86/X86InstrInfo.h
+++ b/lib/Target/X86/X86InstrInfo.h
@@ -368,11 +368,12 @@ namespace X86II {
     // floating point operations performed in the SSE registers.
     XD = 11 << Op0Shift,  XS = 12 << Op0Shift,
 
-    // T8, TA - Prefix after the 0x0F prefix.
+    // T8, TA, A6, A7 - Prefix after the 0x0F prefix.
     T8 = 13 << Op0Shift,  TA = 14 << Op0Shift,
+    A6 = 15 << Op0Shift,  A7 = 16 << Op0Shift,
 
     // TF - Prefix before and after 0x0F
-    TF = 15 << Op0Shift,
+    TF = 17 << Op0Shift,
 
     //===------------------------------------------------------------------===//
     // REX_W - REX prefixes are instruction prefixes used in 64-bit mode.
diff --git a/lib/Target/X86/X86InstrSystem.td b/lib/Target/X86/X86InstrSystem.td
index be7d5efa5a..2710425628 100644
--- a/lib/Target/X86/X86InstrSystem.td
+++ b/lib/Target/X86/X86InstrSystem.td
@@ -398,3 +398,23 @@ let Defs = [RDX, RAX], Uses = [RCX] in
 
 let Uses = [RDX, RAX, RCX] in
   def XSETBV : I<0x01, MRM_D1, (outs), (ins), "xsetbv", []>, TB;
+
+//===----------------------------------------------------------------------===//
+// VIA PadLock crypto instructions
+let Defs = [RAX, RDI], Uses = [RDX, RDI] in
+  def XSTORE : I<0xc0, RawFrm, (outs), (ins), "xstore", []>, A7;
+
+let Defs = [RSI, RDI], Uses = [RBX, RDX, RSI, RDI] in {
+  def XCRYPTECB : I<0xc8, RawFrm, (outs), (ins), "xcryptecb", []>, A7;
+  def XCRYPTCBC : I<0xd0, RawFrm, (outs), (ins), "xcryptcbc", []>, A7;
+  def XCRYPTCTR : I<0xd8, RawFrm, (outs), (ins), "xcryptctr", []>, A7;
+  def XCRYPTCFB : I<0xe0, RawFrm, (outs), (ins), "xcryptcfb", []>, A7;
+  def XCRYPTOFB : I<0xe8, RawFrm, (outs), (ins), "xcryptofb", []>, A7;
+}
+
+let Defs = [RAX, RSI, RDI], Uses = [RAX, RSI, RDI] in {
+  def XSHA1 : I<0xc8, RawFrm, (outs), (ins), "xsha1", []>, A6;
+  def XSHA256 : I<0xd0, RawFrm, (outs), (ins), "xsha256", []>, A6;
+}
+let Defs = [RAX, RDX, RSI], Uses = [RAX, RSI] in
+  def MONTMUL : I<0xc0, RawFrm, (outs), (ins), "montmul", []>, A6;
diff --git a/lib/Target/X86/X86MCCodeEmitter.cpp b/lib/Target/X86/X86MCCodeEmitter.cpp
index 50a96c85ef..a2bd638c29 100644
--- a/lib/Target/X86/X86MCCodeEmitter.cpp
+++ b/lib/Target/X86/X86MCCodeEmitter.cpp
@@ -470,6 +470,8 @@ void X86MCCodeEmitter::EmitVEXOpcodePrefix(uint64_t TSFlags, unsigned &CurByte,
   case X86II::XD:  // F2 0F
     VEX_PP = 0x3;
     break;
+  case X86II::A6:  // Bypass: Not used by VEX
+  case X86II::A7:  // Bypass: Not used by VEX
   case X86II::TB:  // Bypass: Not used by VEX
   case 0:
     break;  // No prefix!
@@ -742,6 +744,8 @@ void X86MCCodeEmitter::EmitOpcodePrefix(uint64_t TSFlags, unsigned &CurByte,
   case X86II::TB:  // Two-byte opcode prefix
   case X86II::T8:  // 0F 38
   case X86II::TA:  // 0F 3A
+  case X86II::A6:  // 0F A6
+  case X86II::A7:  // 0F A7
     Need0FPrefix = true;
     break;
   case X86II::TF: // F2 0F 38
@@ -786,6 +790,12 @@ void X86MCCodeEmitter::EmitOpcodePrefix(uint64_t TSFlags, unsigned &CurByte,
   case X86II::TA:    // 0F 3A
     EmitByte(0x3A, CurByte, OS);
     break;
+  case X86II::A6:    // 0F A6
+    EmitByte(0xA6, CurByte, OS);
+    break;
+  case X86II::A7:    // 0F A7
+    EmitByte(0xA7, CurByte, OS);
+    break;
   }
 }