summaryrefslogtreecommitdiff
path: root/lib/Target/PowerPC/PPCInstrInfo.td
Commit message (Collapse)AuthorAge
* This patch improves the 64-bit PowerPC InitialExec TLS support by providingBill Schmidt2012-12-14
| | | | | | | | | | | | | | | | | | | | | | | | for a wider range of GOT entries that can hold thread-relative offsets. This matches the behavior of GCC, which was not documented in the PPC64 TLS ABI. The ABI will be updated with the new code sequence. Former sequence: ld 9,x@got@tprel(2) add 9,9,x@tls New sequence: addis 9,2,x@got@tprel@ha ld 9,x@got@tprel@l(9) add 9,9,x@tls Note that a linker optimization exists to transform the new sequence into the shorter sequence when appropriate, by replacing the addis with a nop and modifying the base register and relocation type of the ld. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170209 91177308-0d34-0410-b5e6-96231b3b80d8
* This patch implements local-dynamic TLS model support for the 64-bitBill Schmidt2012-12-12
| | | | | | | | | | | | | | | | | | | | | | | PowerPC target. This is the last of the four models, so we now have full TLS support. This is mostly a straightforward extension of the general dynamic model. I had to use an additional Chain operand to tie ADDIS_DTPREL_HA to the register copy following ADDI_TLSLD_L; otherwise everything above the ADDIS_DTPREL_HA appeared dead and was removed. As before, there are new test cases to test the assembly generation, and the relocations output during integrated assembly. The expected code gen sequence can be read in test/CodeGen/PowerPC/tls-ld.ll. There are a couple of things I think can be done more efficiently in the overall TLS code, so there will likely be a clean-up patch forthcoming; but for now I want to be sure the functionality is in place. Bill git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170003 91177308-0d34-0410-b5e6-96231b3b80d8
* This patch implements the general dynamic TLS model for 64-bit PowerPC.Bill Schmidt2012-12-11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Given a thread-local symbol x with global-dynamic access, the generated code to obtain x's address is: Instruction Relocation Symbol addis ra,r2,x@got@tlsgd@ha R_PPC64_GOT_TLSGD16_HA x addi r3,ra,x@got@tlsgd@l R_PPC64_GOT_TLSGD16_L x bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x R_PPC64_REL24 __tls_get_addr nop <use address in r3> The implementation borrows from the medium code model work for introducing special forms of ADDIS and ADDI into the DAG representation. This is made slightly more complicated by having to introduce a call to the external function __tls_get_addr. Using the full call machinery is overkill and, more importantly, makes it difficult to add a special relocation. So I've introduced another opcode GET_TLS_ADDR to represent the function call, and surrounded it with register copies to set up the parameter and return value. Most of the code is pretty straightforward. I ran into one peculiarity when I introduced a new PPC opcode BL8_NOP_ELF_TLSGD, which is just like BL8_NOP_ELF except that it takes another parameter to represent the symbol ("x" above) that requires a relocation on the call. Something in the TblGen machinery causes BL8_NOP_ELF and BL8_NOP_ELF_TLSGD to be treated identically during the emit phase, so this second operand was never visited to generate relocations. This is the reason for the slightly messy workaround in PPCMCCodeEmitter.cpp:getDirectBrEncoding(). Two new tests are included to demonstrate correct external assembly and correct generation of relocations using the integrated assembler. Comments welcome! Thanks, Bill git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169910 91177308-0d34-0410-b5e6-96231b3b80d8
* This patch introduces initial-exec model support for thread-local storageBill Schmidt2012-12-04
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | on 64-bit PowerPC ELF. The patch includes code to handle external assembly and MC output with the integrated assembler. It intentionally does not support the "old" JIT. For the initial-exec TLS model, the ABI requires the following to calculate the address of external thread-local variable x: Code sequence Relocation Symbol ld 9,x@got@tprel(2) R_PPC64_GOT_TPREL16_DS x add 9,9,x@tls R_PPC64_TLS x The register 9 is arbitrary here. The linker will replace x@got@tprel with the offset relative to the thread pointer to the generated GOT entry for symbol x. It will replace x@tls with the thread-pointer register (13). The two test cases verify correct assembly output and relocation output as just described. PowerPC-specific selection node variants are added for the two instructions above: LD_GOT_TPREL and ADD_TLS. These are inserted when an initial-exec global variable is encountered by PPCTargetLowering::LowerGlobalTLSAddress(), and later lowered to machine instructions LDgotTPREL and ADD8TLS. LDgotTPREL is a pseudo that uses the same LDrs support added for medium code model's LDtocL, with a different relocation type. The rest of the processing is straightforward. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169281 91177308-0d34-0410-b5e6-96231b3b80d8
* This patch implements medium code model support for 64-bit PowerPC.Bill Schmidt2012-11-27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default for 64-bit PowerPC is small code model, in which TOC entries must be addressable using a 16-bit offset from the TOC pointer. Additionally, only TOC entries are addressed via the TOC pointer. With medium code model, TOC entries and data sections can all be addressed via the TOC pointer using a 32-bit offset. Cooperation with the linker allows 16-bit offsets to be used when these are sufficient, reducing the number of extra instructions that need to be executed. Medium code model also does not generate explicit TOC entries in ".section toc" for variables that are wholly internal to the compilation unit. Consider a load of an external 4-byte integer. With small code model, the compiler generates: ld 3, .LC1@toc(2) lwz 4, 0(3) .section .toc,"aw",@progbits .LC1: .tc ei[TC],ei With medium model, it instead generates: addis 3, 2, .LC1@toc@ha ld 3, .LC1@toc@l(3) lwz 4, 0(3) .section .toc,"aw",@progbits .LC1: .tc ei[TC],ei Here .LC1@toc@ha is a relocation requesting the upper 16 bits of the 32-bit offset of ei's TOC entry from the TOC base pointer. Similarly, .LC1@toc@l is a relocation requesting the lower 16 bits. Note that if the linker determines that ei's TOC entry is within a 16-bit offset of the TOC base pointer, it will replace the "addis" with a "nop", and replace the "ld" with the identical "ld" instruction from the small code model example. Consider next a load of a function-scope static integer. For small code model, the compiler generates: ld 3, .LC1@toc(2) lwz 4, 0(3) .section .toc,"aw",@progbits .LC1: .tc test_fn_static.si[TC],test_fn_static.si .type test_fn_static.si,@object .local test_fn_static.si .comm test_fn_static.si,4,4 For medium code model, the compiler generates: addis 3, 2, test_fn_static.si@toc@ha addi 3, 3, test_fn_static.si@toc@l lwz 4, 0(3) .type test_fn_static.si,@object .local test_fn_static.si .comm test_fn_static.si,4,4 Again, the linker may replace the "addis" with a "nop", calculating only a 16-bit offset when this is sufficient. Note that it would be more efficient for the compiler to generate: addis 3, 2, test_fn_static.si@toc@ha lwz 4, test_fn_static.si@toc@l(3) The current patch does not perform this optimization yet. This will be addressed as a peephole optimization in a later patch. For the moment, the default code model for 64-bit PowerPC will remain the small code model. We plan to eventually change the default to medium code model, which matches current upstream GCC behavior. Note that the different code models are ABI-compatible, so code compiled with different models will be linked and execute correctly. I've tested the regression suite and the application/benchmark test suite in two ways: Once with the patch as submitted here, and once with additional logic to force medium code model as the default. The tests all compile cleanly, with one exception. The mandel-2 application test fails due to an unrelated ABI compatibility with passing complex numbers. It just so happens that small code model was incredibly lucky, in that temporary values in floating-point registers held the expected values needed by the external library routine that was called incorrectly. My current thought is to correct the ABI problems with _Complex before making medium code model the default, to avoid introducing this "regression." Here are a few comments on how the patch works, since the selection code can be difficult to follow: The existing logic for small code model defines three pseudo-instructions: LDtoc for most uses, LDtocJTI for jump table addresses, and LDtocCPT for constant pool addresses. These are expanded by SelectCodeCommon(). The pseudo-instruction approach doesn't work for medium code model, because we need to generate two instructions when we match the same pattern. Instead, new logic in PPCDAGToDAGISel::Select() intercepts the TOC_ENTRY node for medium code model, and generates an ADDIStocHA followed by either a LDtocL or an ADDItocL. These new node types correspond naturally to the sequences described above. The addis/ld sequence is generated for the following cases: * Jump table addresses * Function addresses * External global variables * Tentative definitions of global variables (common linkage) The addis/addi sequence is generated for the following cases: * Constant pool entries * File-scope static global variables * Function-scope static variables Expanding to the two-instruction sequences at select time exposes the instructions to subsequent optimization, particularly scheduling. The rest of the processing occurs at assembly time, in PPCAsmPrinter::EmitInstruction. Each of the instructions is converted to a "real" PowerPC instruction. When a TOC entry needs to be created, this is done here in the same manner as for the existing LDtoc, LDtocJTI, and LDtocCPT pseudo-instructions (I factored out a new routine to handle this). I had originally thought that if a TOC entry was needed for LDtocL or ADDItocL, it would already have been generated for the previous ADDIStocHA. However, at higher optimization levels, the ADDIStocHA may appear in a different block, which may be assembled textually following the block containing the LDtocL or ADDItocL. So it is necessary to include the possibility of creating a new TOC entry for those two instructions. Note that for LDtocL, we generate a new form of LD called LDrs. This allows specifying the @toc@l relocation for the offset field of the LD instruction (i.e., the offset is replaced by a SymbolLo relocation). When the peephole optimization described above is added, we will need to do similar things for all immediate-form load and store operations. The seven "mcm-n.ll" test cases are kept separate because otherwise the intermingling of various TOC entries and so forth makes the tests fragile and hard to understand. The above assumes use of an external assembler. For use of the integrated assembler, new relocations are added and used by PPCELFObjectWriter. Testing is done with "mcm-obj.ll", which tests for proper generation of the various relocations for the same sequences tested with the external assembler. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168708 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix wrong PowerPC instruction opcodes for:Ulrich Weigand2012-11-13
| | | | | | | | | - lwaux - lhzux - stbu git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167863 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix wrong PowerPC instruction encodings due toUlrich Weigand2012-11-13
| | | | | | | | | | operand field name mismatches in: - AForm_3 (fmul, fmuls) - XFXForm_5 (mtcrf) - XFLForm (mtfsf) git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167862 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix instruction encoding for "bd(n)z" on PowerPC,Ulrich Weigand2012-11-13
| | | | | | | by using a new instruction format BForm_1. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167861 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix instruction encoding for "isel" on PowerPC,Ulrich Weigand2012-11-13
| | | | | | | using a new instruction format AForm_4. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167860 91177308-0d34-0410-b5e6-96231b3b80d8
* - Mark the BCC and BLR defs as isCodeGenOnly per error output fromWill Schmidt2012-10-05
| | | | | | | | | | | | | llvm-tblgen -gen-asm-matcher. PPCInstrInfo.td | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165315 91177308-0d34-0410-b5e6-96231b3b80d8
* - add tokens to PPCInstrInfo.td and PPCInstr64Bit.td to resolveWill Schmidt2012-10-04
| | | | | | | | | | | | | "Instruction 'foo' has no tokens" errors during llvm-tblgen -gen-asm-matcher attempts. At this time, the added tokens are "#comment" style rather than the actual mnemonic. This will be revisited once the rest of the base asmparser bits get straightened out for ppc64-elf-linux. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165237 91177308-0d34-0410-b5e6-96231b3b80d8
* Move the PPC TOC defs into the PPC64 InstrInfo file.Hal Finkel2012-09-05
| | | | | | | | Since TOC is just defined for PPC64, move its definition to PPC64 td file. Patch by Adhemerval Zanella. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163234 91177308-0d34-0410-b5e6-96231b3b80d8
* Split several PPC instruction classes.Hal Finkel2012-08-28
| | | | | | | | | | | | | Slight reorganisation of PPC instruction classes for scheduling. No functionality change for existing subtargets. - Clearly separate load/store-with-update instructions from regular loads and stores. - Split IntRotateD -> IntRotateD and IntRotateDI - Split out fsub and fadd from FPGeneral -> FPAddSub - Update existing itineraries Patch by Tobias von Koch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162729 91177308-0d34-0410-b5e6-96231b3b80d8
* Allow remat of LI on PPC.Hal Finkel2012-08-28
| | | | | | | | | | | Allow load-immediates to be rematerialised in the register coalescer for PPC. This makes test/CodeGen/PowerPC/big-endian-formal-args.ll fail, because it relies on a register move getting emitted. The immediate load is equivalent, so change this test case. Patch by Tobias von Koch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162727 91177308-0d34-0410-b5e6-96231b3b80d8
* Eliminate redundant CR moves on PPC32.Hal Finkel2012-08-28
| | | | | | | | | | | | | | | | The 32-bit ABI requires CR bit 6 to be set if the call has fp arguments and unset if it doesn't. The solution up to now was to insert a MachineNode to set/unset the CR bit, which produces a CR vreg. This vreg was then copied into CR bit 6. When the register allocator saw a bunch of these in the same function, it allocated the set/unset CR bit in some random CR register (1 extra instruction) and then emitted CR moves before every vararg function call, rather than just setting and unsetting CR bit 6 directly before every vararg function call. This patch instead inserts a PPCcrset/PPCcrunset instruction which are then matched by a dedicated instruction pattern. Patch by Tobias von Koch. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162725 91177308-0d34-0410-b5e6-96231b3b80d8
* Add missing SDNPSideEffect flags.Jakob Stoklund Olesen2012-08-24
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162557 91177308-0d34-0410-b5e6-96231b3b80d8
* Remove variable_ops from call instructions in most targets.Jakob Stoklund Olesen2012-07-13
| | | | | | | | Call instructions are no longer required to be variadic, and variable_ops should only be used for instructions that encode a variable number of arguments, like the ARM stm/ldm instructions. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160189 91177308-0d34-0410-b5e6-96231b3b80d8
* Add support for the PPC isel instruction.Hal Finkel2012-06-22
| | | | | | | The isel (integer select) instruction is supported on the 440 and A2 embedded cores and on the POWER7. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159045 91177308-0d34-0410-b5e6-96231b3b80d8
* Convert the PPC backend to use the new FMA infrastructure.Hal Finkel2012-06-22
| | | | | | | The existing contraction patterns are replaced with fma/fneg. Overall functionality should be the same. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158955 91177308-0d34-0410-b5e6-96231b3b80d8
* Add support for generating reg+reg (indexed) pre-inc loads on PPC.Hal Finkel2012-06-20
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158823 91177308-0d34-0410-b5e6-96231b3b80d8
* Add DAG-combines for aggressive FMA formation.Lang Hames2012-06-19
| | | | | | | | | | | | | | | | | | | | | | This patch adds DAG combines to form FMAs from pairs of FADD + FMUL or FSUB + FMUL. The combines are performed when: (a) Either AllowExcessFPPrecision option (-enable-excess-fp-precision for llc) OR UnsafeFPMath option (-enable-unsafe-fp-math) are set, and (b) TargetLoweringInfo::isFMAFasterThanMulAndAdd(VT) is true for the type of the FADD/FSUB, and (c) The FMUL only has one user (the FADD/FSUB). If your target has fast FMA instructions you can make use of these combines by overriding TargetLoweringInfo::isFMAFasterThanMulAndAdd(VT) to return true for types supported by your FMA instruction, and adding patterns to match ISD::FMA to your FMA instructions. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158757 91177308-0d34-0410-b5e6-96231b3b80d8
* Add support for generating reg+reg preinc stores on PPC.Hal Finkel2012-06-19
| | | | | | PPC will now generate STWUX and friends. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158698 91177308-0d34-0410-b5e6-96231b3b80d8
* Split out the PPC instruction class IntSimple from IntGeneral.Hal Finkel2012-06-12
| | | | | | | On the POWER7, adds and logical operations can also be handled in the load/store pipelines. We'll call these IntSimple. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158366 91177308-0d34-0410-b5e6-96231b3b80d8
* Emit the two-operand form of the PPC mfcr instruction as mfocrf.Hal Finkel2012-06-11
| | | | | | This is necessary on Linux and supported on Darwin, see PR2604. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158315 91177308-0d34-0410-b5e6-96231b3b80d8
* Add the PPCCTRLoops pass: a PPC machine-code-level optimization pass to form ↵Hal Finkel2012-06-08
| | | | | | | | | | CTR-based loop branching code. This pass is derived from the Hexagon HardwareLoops pass. The only significant enhancement over the Hexagon pass is that PPCCTRLoops will also attempt to delete the replaced add and compare operations if they are no longer otherwise used. Also, invalid preheader DebugLoc is not used. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158204 91177308-0d34-0410-b5e6-96231b3b80d8
* Implement local-exec TLS on PowerPC.Roman Divacky2012-06-04
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157935 91177308-0d34-0410-b5e6-96231b3b80d8
* Enable prefetch generation on PPC64.Hal Finkel2012-04-01
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153851 91177308-0d34-0410-b5e6-96231b3b80d8
* Split the LdStGeneral PPC itin. class into LdStLoad and LdStStore.Hal Finkel2012-04-01
| | | | | | | | | | | Loads and stores can have different pipeline behavior, especially on embedded chips. This change allows those differences to be expressed. Except for the 440 scheduler, there are no functionality changes. On the 440, the latency adjustment is only by one cycle, and so this probably does not affect much. Nevertheless, it will make a larger difference in the future and this removes a FIXME from the 440 itin. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153821 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix dynamic linking on PPC64.Hal Finkel2012-03-31
| | | | | | | | | | | | | | | | | | Dynamic linking on PPC64 has had problems since we had to move the top-down hazard-detection logic post-ra. For dynamic linking to work there needs to be a nop placed after every call. It turns out that it is really hard to guarantee that nothing will be placed in between the call (bl) and the nop during post-ra scheduling. Previous attempts at fixing this by placing logic inside the hazard detector only partially worked. This is now fixed in a different way: call+nop codegen-only instructions. As far as CodeGen is concerned the pair is now a single instruction and cannot be split. This solution works much better than previous attempts. The scoreboard hazard detector is also renamed to be more generic, there is currently no cpu-specific logic in it. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153816 91177308-0d34-0410-b5e6-96231b3b80d8
* Convert PowerPC to register mask operands.Roman Divacky2012-03-06
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152122 91177308-0d34-0410-b5e6-96231b3b80d8
* Emacs-tag and some comment fix for all ARM, CellSPU, Hexagon, MBlaze, ↵Jia Liu2012-02-18
| | | | | | MSP430, PPC, PTX, Sparc, X86, XCore. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150878 91177308-0d34-0410-b5e6-96231b3b80d8
* make CR spill and restore 64-bit clean (no functional change), and fix some ↵Hal Finkel2011-12-07
| | | | | | other problems found with -verify-machineinstrs git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146024 91177308-0d34-0410-b5e6-96231b3b80d8
* set mayStore and mayLoad on CR pseudosHal Finkel2011-12-07
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146022 91177308-0d34-0410-b5e6-96231b3b80d8
* add RESTORE_CR and support CR unspillsHal Finkel2011-12-06
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145961 91177308-0d34-0410-b5e6-96231b3b80d8
* Move global variables in TargetMachine into new TargetOptions class. As an APINick Lewycky2011-12-02
| | | | | | | | | | | | | change, now you need a TargetOptions object to create a TargetMachine. Clang patch to follow. One small functionality change in PTX. PTX had commented out the machine verifier parts in their copy of printAndVerify. That now calls the version in LLVMTargetMachine. Users of PTX who need verification disabled should rely on not passing the command-line flag to enable it. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145714 91177308-0d34-0410-b5e6-96231b3b80d8
* Add PPC 440 scheduler and some associated testsHal Finkel2011-10-17
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142170 91177308-0d34-0410-b5e6-96231b3b80d8
* Set CR1EQ only when lowering vararg floating arguments (not any varargRoman Divacky2011-08-30
| | | | | | | arguments as before), unset CR1EQ otherwise. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138802 91177308-0d34-0410-b5e6-96231b3b80d8
* Code generation for 'fence' instruction.Eli Friedman2011-07-27
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136283 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix PR8828 by removing the explicit def in MovePCToLR as well as the pointlessCameron Zwarich2011-05-19
| | | | | | | | piclabel operand. The operand in the tablegen definition doesn't actually turn into an MI operand, so it just confuses anything checking the TargetInstrDesc for the number of operands. It suffices to just have an implicit def of LR. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131626 91177308-0d34-0410-b5e6-96231b3b80d8
* PowerPC atomic pseudos clobber CR0, they don't read it.Jakob Stoklund Olesen2011-04-04
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128829 91177308-0d34-0410-b5e6-96231b3b80d8
* Flag -> Glue, the ongoing sagaChris Lattner2010-12-23
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122513 91177308-0d34-0410-b5e6-96231b3b80d8
* Fix a bug I introduced in the ppc refactoring, which caused longChris Lattner2010-11-16
| | | | | | | | | | | | branches to be emitted as: bne cr0, 2 instead of: bne cr0, $+8 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119317 91177308-0d34-0410-b5e6-96231b3b80d8
* split out an encoder for memri operands, allowing a relocation to be ploppedChris Lattner2010-11-15
| | | | | | | | | | | | | | | | | | into the immediate field. This allows us to encode stuff like this: lbz r3, lo16(__ZL4init)(r4) ; globalopt.cpp:5 ; encoding: [0x88,0x64,A,A] ; fixup A - offset: 0, value: lo16(__ZL4init), kind: fixup_ppc_lo16 stw r3, lo16(__ZL1s)(r5) ; globalopt.cpp:6 ; encoding: [0x90,0x65,A,A] ; fixup A - offset: 0, value: lo16(__ZL1s), kind: fixup_ppc_lo16 With this, we should have a completely function MCCodeEmitter for PPC, wewt. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119134 91177308-0d34-0410-b5e6-96231b3b80d8
* add support for encoding the lo14 forms used for a few PPC64 addressingChris Lattner2010-11-15
| | | | | | | | | | | modes. For example, we now get: ld r3, lo16(_G)(r3) ; encoding: [0xe8,0x63,A,0bAAAAAA00] ; fixup A - offset: 0, value: lo16(_G), kind: fixup_ppc_lo14 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119133 91177308-0d34-0410-b5e6-96231b3b80d8
* implement the start of support for lo16 and ha16, allowing us to get stuff like:Chris Lattner2010-11-15
| | | | | | | | lis r4, ha16(__ZL4init) ; encoding: [0x3c,0x80,A,A] ; fixup A - offset: 0, value: ha16(__ZL4init), kind: fixup_ppc_ha16 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119127 91177308-0d34-0410-b5e6-96231b3b80d8
* change direct branches to encode with the same encoding methodChris Lattner2010-11-15
| | | | | | | | | as direct calls. Change conditional branches to encode with their own method, simplifying the JIT encoder and making room for adding an mc fixup. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119125 91177308-0d34-0410-b5e6-96231b3b80d8
* eliminate a now-unneeded operand printer.Chris Lattner2010-11-15
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119124 91177308-0d34-0410-b5e6-96231b3b80d8
* split call operands out to their own encoding class, simplifyingChris Lattner2010-11-15
| | | | | | | | | | | code in the JIT. Use this to form the first fixup for the PPC backend, giving us stuff like this: bl L_foo$stub ; encoding: [0b010010AA,A,A,0bAAAAAA01] ; fixup A - offset: 0, value: L_foo$stub, kind: fixup_ppc_br24 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119123 91177308-0d34-0410-b5e6-96231b3b80d8
* add proper encoding for MTCRF instead of using a hack.Chris Lattner2010-11-15
| | | | git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119121 91177308-0d34-0410-b5e6-96231b3b80d8
* add basic encoding support for immediates and registers, allowing us Chris Lattner2010-11-15
| | | | | | | | | | | | to encode all of these instructions correctly (for example): mflr r0 ; encoding: [0x7c,0x08,0x02,0xa6] stw r0, 8(r1) ; encoding: [0x90,0x01,0x00,0x08] stwu r1, -64(r1) ; encoding: [0x94,0x21,0xff,0xc0] git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119118 91177308-0d34-0410-b5e6-96231b3b80d8
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-03 13:08:05 +0000