Move FreeBSD specific files to the new FreeBSD folders.

3 files changed, 1 insertions, 369 deletions

diff --git a/etc.BSD/Makefile b/etc.BSD/Makefile
index 639b927..cb466dc 100644
--- a/etc.BSD/Makefile
+++ b/etc.BSD/Makefile
@@ -1,6 +1,5 @@
 DIR=	/etc
-CONF=	devd.conf rc rc.shutdown
-BIN=	rc.devd
+CONF=	$(CONTENTS)
 
 MK=	../mk
 include ${MK}/scripts.mk
diff --git a/etc.BSD/devd.conf b/etc.BSD/devd.conf
deleted file mode 100644
index 3cd262c..0000000
--- a/etc.BSD/devd.conf
+++ /dev/null
@@ -1,315 +0,0 @@
-# $FreeBSD: src/etc/devd.conf,v 1.38 2007/06/21 22:50:36 njl Exp $
-#
-# Refer to devd.conf(5) and devd(8) man pages for the details on how to
-# run and configure devd.
-#
-
-# NB: All regular expressions have an implicit ^$ around them.
-# NB: device-name is shorthand for 'match device-name'
-
-options {
-	# Each directory directive adds a directory the list of directories
-	# that we scan for files.  Files are read-in in the order that they
-	# are returned from readdir(3).  The rule-sets are combined to
-	# create a DFA that's used to match events to actions.
-	directory "/etc/devd";
-	directory "/usr/local/etc/devd";
-	pid-file "/var/run/devd.pid";
-
-	# Setup some shorthand for regex that we use later in the file.
-	#XXX Yes, these are gross -- imp
-	set scsi-controller-regex
-		"(aac|adv|adw|aha|ahb|ahc|ahd|aic|amd|amr|asr|bt|ciss|ct|dpt|\
-		esp|ida|iir|ips|isp|mlx|mly|mpt|ncr|ncv|nsp|stg|sym|trm|wds)\
-		[0-9]+";
-};
-
-# Note that the attach/detach with the highest value wins, so that one can
-# override these general rules.
-
-#
-# Configure the interface on attach.  Due to a historical accident, this
-# script is called pccard_ether.
-#
-notify 0 {
-	match "system"		"IFNET";
-	match "type"		"ATTACH";
-	action "/etc/rc.devd net.$subsystem start";
-};
-
-notify 0 {
-	match "system"		"IFNET";
-	match "type"		"DETACH";
-	action "/etc/rc.devd net.$subsystem stop";
-};
-
-#
-# Try to configure the interface when the network comes up and deconfigure
-# when it goes down
-#
-notify 0 {
-	match "system"		"IFNET";
-	match "type"		"LINK_UP";
-	media-type		"ethernet";
-	action "/etc/rc.devd net.$subsystem start";
-};
-
-notify 0 {
-	match "system"		"IFNET";
-	match "type"		"LINK_DOWN";
-	media-type		"ethernet";
-	action "/etc/rc.devd net.$subsystem stop";
-};
-#
-# Like Ethernet devices, but separate because
-# they have a different media type.  We may want
-# to exploit this later.
-#
-detach 0 {
-	media-type "802.11";
-	action "/etc/rc.devd net.$device-name stop";
-};
-attach 0 {
-	media-type "802.11";
-	action "/etc/rc.devd net.$device-name start";
-};
-notify 0 {
-	match "system"		"IFNET";
-	match "type"		"LINK_UP";
-	media-type		"802.11";
-	action "/etc/rc.devd net.$subsystem start";
-};
-notify 0 {
-	match "system"		"IFNET";
-	match "type"		"LINK_DOWN";
-	media-type		"802.11";
-	action "/etc/rc.devd net.$subsystem stop";
-};
-
-# An entry like this might be in a different file, but is included here
-# as an example of how to override things.  Normally 'ed50' would match
-# the above attach/detach stuff, but the value of 100 makes it
-# hard wired to 1.2.3.4.
-attach 100 {
-	device-name "ed50";
-	action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
-};
-detach 100 {
-	device-name "ed50";
-};
-
-# When a USB Bluetooth dongle appears activate it
-attach 100 {
-	device-name "ubt[0-9]+";
-	action "/etc/rc.d/bluetooth start $device-name";
-};
-detach 100 {
-	device-name "ubt[0-9]+";
-	action "/etc/rc.d/bluetooth stop $device-name";
-};
-
-# When a USB keyboard arrives, attach it as the console keyboard.
-attach 100 {
-	device-name "ukbd0";
-	action "/etc/rc.d/syscons setkeyboard /dev/ukbd0";
-};
-detach 100 {
-	device-name "ukbd0";
-	action "/etc/rc.d/syscons setkeyboard /dev/kbd0";
-};
-
-# The entry below starts moused when a mouse is plugged in. Moused
-# stops automatically (actually it bombs :) when the device disappears.
-attach 100 {
-	device-name "ums[0-9]+";
-	action "/etc/rc.devd moused.$device-name start";
-};
-
-# Firmware download into the ActiveWire board. After the firmware download is
-# done the device detaches and reappears as something new and shiny
-# automatically.
-attach 100 {
-	match "vendor"	"0x0854";
-	match "product"	"0x0100";
-	match "release"	"0x0000";
-	action "/usr/local/bin/ezdownload -f /usr/local/share/usb/firmware/0854.0100.0_01.hex $device-name";
-};
-
-# Firmware download for Entrega Serial DB25 adapter.
-attach 100 {
-	match "vendor"	"0x1645";
-	match "product"	"0x8001";
-	match "release"	"0x0101";
-	action "if ! kldstat -n usio > /dev/null 2>&1 ; then kldload usio; fi /usr/sbin/ezdownload -v -f /usr/share/usb/firmware/1645.8001.0101 /dev/$device-name";
-};
-
-# This entry starts the ColdSync tool in daemon mode. Make sure you have an up
-# to date /usr/local/etc/palms. We override the 'listen' settings for port and
-# type in /usr/local/etc/coldsync.conf.
-attach 100 {
-	device-name "ugen[0-9]+";
-	match "vendor" "0x082d";
-	match "product" "0x0100";
-	match "release" "0x0100";
-	action "/usr/local/bin/coldsync -md -p /dev/$device-name -t usb";
-};
-
-#
-# Rescan scsi device-names on attach, but not detach.  However, it is
-# disabled by default due to reports of problems.
-#
-attach 0 {
-	device-name "$scsi-controller-regex";
-//	action "camcontrol rescan all";
-};
-
-# Don't even try to second guess what to do about drivers that don't
-# match here.  Instead, pass it off to syslog.  Commented out for the
-# moment, as the pnpinfo variable isn't set in devd yet.  Individual
-# variables within the bus supplied pnpinfo are set.
-nomatch 0 {
-#	action "logger Unknown device: $pnpinfo $location $bus";
-};
-
-# Various logging of unknown devices.
-nomatch 10 {
-	match "bus" "uhub[0-9]+";
-	action "logger Unknown USB device: vendor $vendor product $product \
-		bus $bus";
-};
-
-# Some PC-CARDs don't offer numerical manufacturer/product IDs, just
-# show the CIS info there.
-nomatch 20 {
-	match "bus" "pccard[0-9]+";
-	match "manufacturer" "0xffffffff";
-	match "product" "0xffffffff";
-	action "logger Unknown PCCARD device: CISproduct $cisproduct \
-		CIS-vendor $cisvendor bus $bus";
-};
-
-nomatch 10 {
-	match "bus" "pccard[0-9]+";
-	action "logger Unknown PCCARD device: manufacturer $manufacturer \
-		product $product CISproduct $cisproduct CIS-vendor \
-		$cisvendor bus $bus";
-};
-
-nomatch 10 {
-	match "bus" "cardbus[0-9]+";
-	action "logger Unknown Cardbus device: device $device class $class \
-		vendor $vendor bus $bus";
-};
-
-# Switch power profiles when the AC line state changes.
-notify 10 {
-	match "system"		"ACPI";
-	match "subsystem"	"ACAD";
-	action "/etc/rc.d/power_profile $notify";
-};
-
-# Notify all users before beginning emergency shutdown when we get
-# a _CRT or _HOT thermal event and we're going to power down the system
-# very soon.
-notify 10 {
-	match "system"		"ACPI";
-	match "subsystem"	"Thermal";
-	match "notify"		"0xcc";
-	action "logger -p kern.emerg 'WARNING: system temperature too high, shutting down soon!'";
-};
-
-# Sample ZFS problem reports handling.
-notify 10 {
-	match "system"		"ZFS";
-	match "type"		"zpool";
-	action "logger -p kern.err 'ZFS: failed to load zpool $pool'";
-};
-
-notify 10 {
-	match "system"		"ZFS";
-	match "type"		"vdev";
-	action "logger -p kern.err 'ZFS: vdev failure, zpool=$pool type=$type'";
-};
-
-notify 10 {
-	match "system"		"ZFS";
-	match "type"		"data";
-	action "logger -p kern.warn 'ZFS: zpool I/O failure, zpool=$pool error=$zio_err'";
-};
-
-notify 10 {
-	match "system"		"ZFS";
-	match "type"		"io";
-	action "logger -p kern.warn 'ZFS: vdev I/O failure, zpool=$pool path=$vdev_path offset=$zio_offset size=$zio_size error=$zio_err'";
-};
-
-notify 10 {
-	match "system"		"ZFS";
-	match "type"		"checksum";
-	action "logger -p kern.warn 'ZFS: checksum mismatch, zpool=$pool path=$vdev_path offset=$zio_offset size=$zio_size'";
-};
-
-# User requested suspend, so perform preparation steps and then execute
-# the actual suspend process.
-notify 10 {
-	match "system"		"ACPI";
-	match "subsystem"	"Suspend";
-	action "/etc/rc.suspend acpi $notify";
-};
-notify 10 {
-	match "system"		"ACPI";
-	match "subsystem"	"Resume";
-	action "/etc/rc.resume acpi $notify";
-};
-
-/* EXAMPLES TO END OF FILE
-
-# The following might be an example of something that a vendor might
-# install if you were to add their device.  This might reside in
-# /usr/local/etc/devd/deqna.conf.  A deqna is, in this hypothetical
-# example, a pccard ethernet-like device.  Students of history may
-# know other devices by this name, and will get the in-jokes in this
-# entry.
-nomatch 10 {
-	match "bus" "pccard[0-9]+";
-	match "manufacturer" "0x1234";
-	match "product" "0x2323";
-	action "kldload if_deqna";
-};
-attach 10 {
-	device-name "deqna[0-9]+";
-	action "/etc/pccard_ether $device-name start";
-};
-detach 10 {
-	device-name "deqna[0-9]+";
-	action "/etc/pccard_ether $device-name stop";
-};
-
-# Examples of notify hooks.  A notify is a generic way for a kernel
-# subsystem to send event notification to userland.
-#
-# Here are some examples of ACPI notify handlers.  ACPI subsystems that
-# generate notifies include the AC adapter, power/sleep buttons,
-# control method batteries, lid switch, and thermal zones.
-#
-# Information returned is not always the same as the ACPI notify
-# events.  See the ACPI specification for more information about
-# notifies.  Here is the information returned for each subsystem:
-#
-# ACAD:		AC line state (0 is offline, 1 is online)
-# Button:	Button pressed (0 for power, 1 for sleep)
-# CMBAT:	ACPI battery events
-# Lid:		Lid state (0 is closed, 1 is open)
-# Suspend, Resume: Suspend and resume notification
-# Thermal:	ACPI thermal zone events
-#
-# This example calls a script when the AC state changes, passing the
-# notify value as the first argument.  If the state is 0x00, it might
-# call some sysctls to implement economy mode.  If 0x01, it might set
-# the mode to performance.
-notify 10 {
-	match "system"		"ACPI";
-	match "subsystem"	"ACAD";
-	action			"/etc/acpi_ac $notify";
-};
-*/
diff --git a/etc.BSD/rc.devd b/etc.BSD/rc.devd
deleted file mode 100644
index 3073ce5..0000000
--- a/etc.BSD/rc.devd
+++ /dev/null
@@ -1,52 +0,0 @@
-#!/bin/sh
-# Copyright 2007 Roy Marples
-# All rights reserved
-
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-# 1. Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-# 2. Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the distribution.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
-# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-# SUCH DAMAGE.
-
-# Inform RC that we are in the background and hotplugged
-export IN_BACKGROUND=yes
-export IN_HOTPLUG=yes
-
-getmedia() {
-	ifconfig "$1" | while read line; do
-		case "${line}" in
-			media:" "*) echo "${line}"; return;;
-		esac
-	done
-}
-
-# Try and create an init script for network interfaces
-if [ ! -e /etc/init.d/"$1" -a ! -e /usr/local/init.d/"$1" ]; then
-	base=${1%%.*}
-	if [ "${base}" = "net" ]; then
-		# We only create links for pyhsical interfaces
-		[ -n "$(getmedia ${1#*.})" ] || exit 1
-		base="net.lo0"
-	fi
-	if [ -e /etc/init.d/"${base}" -a "${base}" != "$1" ]; then
-		ln -s "${base}" /etc/init.d/"$1"
-	fi
-fi
-
-# Run the init script
-exec /etc/init.d/"$1" "$2"